CFA735-TFK-KR2

20x4 with Keypad, White Edge LED Backlight, FSTN Positive, Transflective, -20°C to +70°C, 12:00. Includes WRUSBY34 cable.

General
Tech Specs
Docs / Files
Notices
Dimensions
Related
Photos

CFA735 Family

LED backlit STN 20x4 LCD
Integrated LED backlit 6-button translucent silicon keypad with screened legend
Four bi-color (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
Three color options:
- Yellow-green backlit positive mode LCD, yellow/green keypad backlight ("YYK")
- White backlit negative mode LCD, blue keypad backlight ("TML")
- White backlit positive mode LCD, white keypad backlight ("TFK")
Fully decoded keypad: any key combination is valid and unique
LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
Serial and USB interfaces (115200 baud equivalent throughput)
- KT supports full swing RS-232 with CFARS-232 daughter board and USB simultaneously
- KR supports 0-5v logic level serial and USB simultaneously
Robust packet based communications protocol with 16-bit CRC
Compact size: fits in a 1U rack mount case (37.5mm overall height)
ATX power supply control functionality allows the buttons on the CFA735 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
Built-in microcontroller with field-upgradeable firmware
Non-volatile memory capability ("EEPROM"):
- Customize the "power-on" display and LED settings
- 16-byte "scratch" register for storing IP, netmask, system serial number
Run STM32 embedded applications on the CFA735 hardware.
Open source firmware for CFA735 displays allows you to customize and write/run your own user code.

For reference only. For design purposes, please use the specifications in the datasheet.

Physical Characteristics

Characters x Lines

20 x 4

Module Overall
	width	height	depth
millimeters	142	38	21.1
inches	5	1	0.8

Other Features Affecting Size
Keypad Please see the datasheet

Viewing Area
	width	height
millimeters	83.1	27.54
inches	3.2	1.08

Active Area
	width	height
millimeters	79.27	23.78
inches	3.12	0.93

Character Size
	width	height
millimeters	3.23	4.88
inches	0.12	0.19

Character Pitch
	width	height
millimeters	3.9	5.6
inches	0.1	0.2

Dot Size
	width	height
millimeters	0.3	0.33
inches	0.0	0.01

Dot Pitch
	width	height
millimeters	0.33	0.35
inches	0.01	0.01

Weight

57g

Keystroke Travel	2.4mm
Keypad Depth	12mm

Optical Characteristics

Display Technology	LCD
Display Addressing	Passive
Glass Type/Glass Color	FSTN/Light Grey
Polarizer	Transflective
View Direction	12:00

Backlight Color	White
Backlight Type	LED
Mode	Positive
Foreground Color	Dark
Background Color	White

Electrical Specifications

Supply Voltage for Logic Maximum

5.5V

Environmental

Operating Temperatures
	min	max
Celsius	-20°	70°
Farenheit	-4°	158°

Storage Temperatures
	min	max
Celsius	-30°	80°
Farenheit	-22°	176°

Humidity
	min	max
Non-condensing	0%	90%

Electronics

Interface

Logic Level Serial, USB

Datasheets

CFA735-xxx-KR_Data_Sheet_Release_Date_2012-02-13.pdf (5MB, Feb 2012, Datasheet v.2012-02-13)

Obsolete Datasheets

CFA735-xxx-KR_Data_Sheet_Release_Date_2012-02-03.pdf (5MB, Feb 2012, Datasheet v.2012-02-03)
CFA735-xxx-KR_Data_Sheet_0v9_Preliminary.pdf (7MB, Jan 2012, Datasheet v.0v9 Preliminary, Hardware v.0v9, Firmware v.0v9)

Other Files

Software Binary - WHQL CFA735 Driver (4MB) WHQL USB drivers for CFA735 family of modules
Software Binary - CFA735 0vB Firmware (2MB)
Software Binary - CFA735 0vA Firmware (2MB)
Software Binary - CFA735 0v9 Firmware (2MB)
CAD Export - CFA735 Family 2D CAD (2MB)
1 to 1 Template - CFA735 Family 1:1 Outline Drawing (100KB)
Other Document - How To: CFA735 Firmware Upgrade (2MB) How to upgrade the firmware of the CFA735 family of modules.
Other Document - Copyrights Acknowledgement (157KB)

Subscribe to Part Change Notices by email or RSS

Part Change Notice #10404

Products Affected:	CFA735-TFK-KR, CFA735-TFK-KT1, CFA735-TFK-KR1, CFA735-TFK-KR2, CFA735-TML-KR, CFA735-TML-KR1, CFA735-TML-KR2, CFA735-TML-KT, CFA735-TML-KT1, CFA735-YYK-KR, CFA735-YYK-KR1, CFA735-YYK-KR2, CFA735-YYK-KT, CFA735-YYK-KT1, CFA735_USB_Driver
Date Issued:	March 13, 2012
Summary:	WHQL Drivers for CFA735 family
Last revision:	1.0.0.0
Description:	USB drivers for the CFA735 are now WHQL certified
Availability:	Immediate
Price Change:	N / A

Part Change Notice #10401

Products Affected:	CFA735-TFK-KR, CFA735-TFK-KT, CFA735-TFK-KT1, CFA735-TFK-KR1, CFA735-TFK-KR2, CFA735-TML-KR, CFA735-TML-KR1, CFA735-TML-KR2, CFA735-TML-KT, CFA735-TML-KT1, CFA735-YYK-KR, CFA735-YYK-KR1, CFA735-YYK-KR2, CFA735-YYK-KT, CFA735-YYK-KT1
Date Issued:	February 3, 2012
Summary:	CFA735 family firmware 0vB
Last revision:	0vA
Description:	As part of our continuous improvement process, a new version of the CFA735 firmware is being released to address possible functional and performance issues.
Reason:	Corrects the RAM Layout for the STM32F103RC microcontroller.
Impact:	Low.
Recommendation:	We are recommending that all CFA735 modules be updated to 0vB firmware as soon as possible. NOTE: 0vB firmware requires 0vA hardware. See PCN 10400.
Availability:	CFA735 modules shipped from Crystalfontz America Inc, on or after 2012-02-06
Price Change:	This firmware update does not effect the pricing of the CFA735 family.

Part Change Notice #10400

Products Affected:	CFA735-TFK-KR, CFA735-TFK-KT, CFA735-TFK-KT1, CFA735-TFK-KR1, CFA735-TFK-KR2, CFA735-TML-KR, CFA735-TML-KR1, CFA735-TML-KR2, CFA735-TML-KT, CFA735-TML-KT1, CFA735-YYK-KR, CFA735-YYK-KR1, CFA735-YYK-KR2, CFA735-YYK-KT, CFA735-YYK-KT1
Date Issued:	January 31, 2012
Summary:	CFA735 family hardware 0vA
Last revision:	0v9
Description:	As part of our continuous improvement process, a new version of the CFA735 hardware is being released to address functional and performance issues. There is a supporting firmware revision for this hardware release. See PCN 10399.
Reason:	A 1MΩ 0603 resistor has been added at RC2 in support of fixing and extraneous byte received by the host when using the serial interface after a module reset. There is additional support for this fix in firmware 0vA.
Impact:	All CFA735 family modules are affected with this hardware update.
Recommendation:	All CFA735 modules that use the serial interface or GPIO lines should update to the new 0vA hardware and supporting firmware. If you require assistance loading the 0603 1MΩ resistor in RC2, please contact support@crystalfontz.com.
Availability:	Hardware 0vA and supporting firmware is shipping as standard release as of 2012/01/30.
Price Change:	No price change.

Part Change Notice #10399

Products Affected:	CFA735-TFK-KR, CFA735-TFK-KT, CFA735-TFK-KT1, CFA735-TFK-KR1, CFA735-TFK-KR2, CFA735-TML-KR, CFA735-TML-KR1, CFA735-TML-KR2, CFA735-TML-KT, CFA735-TML-KT1, CFA735-YYK-KR, CFA735-YYK-KR1, CFA735-YYK-KR2, CFA735-YYK-KT, CFA735-YYK-KT1
Date Issued:	January 31, 2012
Summary:	CFA735 family firmware 0vA
Last revision:	0v9
Description:	As part of our continuous improvement process, a new version of the CFA735 firmware is being released to address functional and performance issues. There is a supporting hardware revision for this firmware release. See PCN 10400.
Reason:	Correct Command 0x9 Data[0] to only accept 0-7 as the index for the custom characters. In 0v9 0-15 were valid but 8-15 were references to 0-7 respectively. Fix H1 Pins not functioning when used as GPIOs Fix extraneous byte received by the host when using the serial interface after a module reset. For this fix to be fully effective the module requires a 1 MΩ 0603 resistor at RC2 (which is standard in the 0vA hardware).
Impact:	All CFA735 family modules are affected with this firmware update. Firmware version 0vA requires supporting hardware version 0vA.
Recommendation:	All CFA735 modules that use the serial interface or GPIO lines should update to the new 0vA firmware and supporting hardware. If you require assistance loading the 0603 1MΩ resistor in RC2, please contact support@crystalfontz.com.
Availability:	Firmware 0vA and supporting hardware is shipping as standard release as of 2012/01/30.
Price Change:	No price change.

Tech Bulletin #10380

New Product:	CFA735-TFK-KR2
Date Issued:	January 5, 2012
Summary:	(New Product) CFA735-TFK-KR2
Description:	Under Intelligent USB LCD Modules: 20x4 with Keypad, White Edge LED Backlight, FSTN Positive, Transflective, -20°C to +70°C, 12:00.

Tech Bulletin #10377

Products Affected:	CFA635-TMF-KU1, CFA635-TMF-KU2, CFA635-TFE-KU1, CFA635-TFE-KU2, CFA635-YYE-KU1, CFA635-YYE-KU2, CFA635-YYE-KS1, CFA635-TMF-KS1, CFA635-TFE-KS1, CFA635-YYE-KS, CFA635-TMF-KS, CFA635-TFE-KS, CFA635-TMF-KL, CFA635-TFE-KL, CFA635-YYE-KL, CFA735-TFK-KR, CFA735-TFK-KT, CFA735-TFK-KT1, CFA735-TFK-KR1, CFA735-TFK-KR2, CFA735-TML-KR, CFA735-TML-KR1, CFA735-TML-KR2, CFA735-TML-KT, CFA735-TML-KT1, CFA735-YYK-KR, CFA735-YYK-KR1, CFA735-YYK-KR2, CFA735-YYK-KT, CFA735-YYK-KT1
Date Issued:	January 3, 2012
Summary:	CFA635 to CFA735 Migration
Description:	Detailed in formation on migrating from the CFA635 family to the CFA735 family of intelligent modules. The document covers the similarities and differences between the two family of modules.
Reason:	Support for the CFA735 product announcement.
Recommendation:	All CFA635 users should download and read the document.
Availability:	Q1 2012 – Initial run of CFA735 family available. Limited Quantities. Q2 2012 – Production level shipments of CFA735 family. Q3 2012 - CFA735 fully replaces CFA635.
Attachment:	CFA735_Migration_doc.pdf (734KB)

Tech Bulletin #10376

New Products:	CFA735-TFK-KR, CFA735-TFK-KT, CFA735-TFK-KT1, CFA735-TFK-KR1, CFA735-TFK-KR2, CFA735-TML-KR, CFA735-TML-KR1, CFA735-TML-KR2, CFA735-TML-KT, CFA735-TML-KT1, CFA735-YYK-KR, CFA735-YYK-KR1, CFA735-YYK-KR2, CFA735-YYK-KT, CFA735-YYK-KT1
Date Issued:	January 3, 2012
Summary:	Announcing CFA735 family of intelligent LCD modules with CFA635 emulation.
Description:	Crystalfontz America Inc. is proud to announce the release of the CFA735 family of intelligent modules. The CFA735 family represents the first of a new generation of our serial and USB interface modules as part of our continuous improvement process. Designed as an easy replacement for the CFA635 family of modules, the CFA735 family is a significant improvement in capability, capacity, flexibility and useability. The CFA735 family in CFA635 Emulation Mode has native support for simultaneous USB and Serial operation. There is an option to order the CFA735 with the CFA-RS-232-01 level inverter for full-swing RS-232 interfaces. The CFA735 family is available as a bare module, with your choice of internal / external USB cable, or with a serial cable kit (power, internal, and external connectivity).
Reason:	The CFA735 in CFA635 emulation mode is being released as a replacement for the CFA635 family of modules. The CFA635 family of modules has reached it's EOL.
Impact:	Customers migrating from the CFA635 family should place orders for engineering samples, and qualify as required by established procedures.
Availability:	The first run of the CFA735 family is available for immediate shipment in limited quantities. The initial release of the CFA735 family is CFA635 Emulation Mode. Our goal was to allow our customers that have integrated the CFA635 into their systems the ability to migrate to the CFA735 in CFA635 Emulation Mode with the least amount of interruption. Q1 2012 – Initial run of CFA735 family available. Limited Quantities. Q2 2012 – Production level shipments of CFA735 family. Q3 2012 - CFA735 fully replaces CFA635.
Price Change:	Please see the individual product pages for current pricing.
Attachment:	CFA735_Product_Announcement.pdf (2MB)