XES635BK-TFE-KU
USB LCD 20x4, Keypad, External Enclosure, White Edge LED Backlight, RoHS compliant, FSTN Positive, Transflective, 0°C to +50°C, 12:00 viewing angle. Includes ~9 foot black low-drop captive USB "A" cable.XES635BK External USB LCDs Family
- LED backlit STN 20x4 LCD
- Integrated LED backlit 6-button translucent silicon keypad with screened legend
- Four bi-color (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
-
Three color options:
- Yellow-green backlit positive mode LCD, yellow/green keypad backlight ("YYE")
- White backlit negative mode LCD, blue keypad backlight ("TMF")
- White backlit positive mode LCD, white keypad backlight ("TFE")
- Fully decoded keypad: any key combination is valid and unique
- LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
- USB interface for both power and data (115200 baud equivalent throughput)
- Robust packet based communications protocol with 16-bit CRC
- Built-in microcontroller
- RoHS Compliant
-
Non-volatile memory capability ("EEPROM"):
- Customize the "power-on" display and LED settings
- 16-byte "scratch" register for storing IP, netmask, system serial number
For reference only. For design purposes, please use the specifications in the datasheet.
Physical Characteristics
| Characters x Lines | 20 x 4 |
| Module Overall | |||
|---|---|---|---|
| width | height | depth | |
| millimeters | 146 | 39.3 | 20.55 |
| inches | 5 | 1.5 | 0.80 |
| PCB Outline | |||
|---|---|---|---|
| width | height | depth | |
| millimeters | 146 | 39.3 | 20.55 |
| inches | 5 | 1.5 | 0.80 |
| Other Features Affecting Size | |
|---|---|
Please see the datasheet
| |
| Viewing Area | |||
|---|---|---|---|
| width | height | ||
| millimeters | 80.95 | 25.5 | |
| inches | 3.18 | 1.0 | |
| Active Area | |||
|---|---|---|---|
| width | height | ||
| millimeters | 77.95 | 22.35 | |
| inches | 3.06 | 0.87 | |
| Character Size | |||
|---|---|---|---|
| width | height | ||
| millimeters | 3.85 | 5.55 | |
| inches | 0.15 | 0.21 | |
| Character Pitch | |||
|---|---|---|---|
| width | height | ||
| millimeters | 3.9 | 5.6 | |
| inches | 0.1 | 0.2 | |
| Dot Size | |||
|---|---|---|---|
| width | height | ||
| millimeters | 0.6 | 0.65 | |
| inches | 0.0 | 0.02 | |
| Dot Pitch | |||
|---|---|---|---|
| width | height | ||
| millimeters | 0.65 | 0.7 | |
| inches | 0.02 | 0.0 | |
| Keystroke Travel | 2.4mm |
Optical Characteristics
| Display Technology | LCD |
| Display Addressing | passive |
| Glass Type/Glass Color | FSTN/Light Grey |
| Polarizer | Transflective |
| View Direction | 12:00 |
| Backlight Color | White |
| Backlight Type | LED |
| Mode | Positive |
| Foreground Color | Dark |
| Background Color | Light Grey |
Environmental
| Operating Temperatures | |||
|---|---|---|---|
| min | max | ||
| Celsius | 0° | 50° | |
| Farenheit | 32° | 122° | |
| Storage Temperatures | |||
|---|---|---|---|
| min | max | ||
| Celsius | -10° | 60° | |
| Farenheit | 14° | 140° | |
| Humidity | |||
|---|---|---|---|
| min | max | ||
| Non-condensing | 0% | 90% | |
Electronics
| Interface | USB |
Datasheets
XES635BK-TFE-KU_Data_Sheet_v2.0.pdf (3MB, Oct 2010, Datasheet v.2.0, Hardware v.3.1, Firmware v.1.6)
Other Files
Subscribe to Part Change Notices by email
or RSS
Part Change Notice #10365
| Products Affected: | CFA635-TMF-KU1, CFA635-TMF-KU2, CFA635-TFE-KU1, CFA635-TFE-KU2, CFA635-YYE-KU1, CFA635-YYE-KU2, CFA635-YYE-KS1, CFA635-TMF-KS1, CFA635-TFE-KS1, CFA635-YYE-KS, CFA635-TMF-KS, CFA635-TFE-KS, CFA635-TMF-KL, CFA635-TFE-KL, DB635-ALTMF-KU1, DB635-ALTMF-KU2, DB635-ALTMF-KU3, DB635-ALYYE-KU1, DB635-ALYYE-KU2, DB635-ALYYE-KU3, DB635-BGTMF-KU1, DB635-BGTMF-KU2, DB635-BGTMF-KU3, DB635-BGYYE-KU1, DB635-BGYYE-KU2, DB635-BGYYE-KU3, DB635-BKTMF-KU1, DB635-BKTMF-KU2, DB635-BKTMF-KU3, DB635-BKYYE-KU1, DB635-BKYYE-KU2, DB635-BKYYE-KU3, DB635-AKTMF-KU1, DB635-AKTMF-KU2, DB635-AKTMF-KU3, DB635-AKYYE-KU1, DB635-AKYYE-KU2, DB635-AKYYE-KU3, DB635-AKTFE-KU1, DB635-AKTFE-KU2, DB635-AKTFE-KU3, CFA635-TFE-KU, CFA635-YYE-KL, DB635-ALTFE-KU1, DB635-ALTFE-KU2, DB635-ALTFE-KU3, DB635-BGTFE-KU1, DB635-BGTFE-KU2, DB635-BGTFE-KU3, DB635-BKTFE-KU1, DB635-BKTFE-KU2, DB635-BKTFE-KU3, XES635BK-TFE-KU, XES635BK-TMF-KU, XES635BK-YYE-KU, CFA635-TMF-KU, CFA635-YYE-KU |
| Date Issued: | October 6, 2011 |
| Summary: | End of Life announcement: CFA635 family of Intelligent Modules. |
| Last revision: | HW: v1.1, FW: v1.6 |
| Description: | Effective immediately, Crystalfontz America, Inc is announcing the End of Life (EOL) for the CFA635 family of modules. The CFA635 is a character based intelligent LCD module built around a Cypress PsoCŪ micro-controller and a Samsung S6A0073 LCD controller. Samsung announced the EOL of the S6A0073 at the end of 2007. After the announcement, Crystalfontz America, Inc began designing a replacement module and planned for continuing to manufacture and support the CFA635 family until a compatible replacement module was designed and available. |
| Reason: | As part of our continuous improvement process, the engineering services group at Crystalfontz America Inc. is announcing the End of Life (EOL) to our CFA635 family of modules. This end of life is scheduled to take place at the end of 2012 Q2. The CFA635 is being replaced with the first of a new generation of intelligent modules from Crystalfontz America, Inc. This new module is the CFA735 family. The CFA735 family has been primarily designed to be a replacement for the CFA635 family with a number of enhancements / improvements. |
| Impact: | This announcement impacts all variants, interfaces, and part numbers that currently use the CFA635 family of modules. The CFA635 family is not recommended for new designs. |
| Recommendation: | Continue to order and build with the CFA635 as required by schedules. Plan on making transition to the CFA735 family of modules when available.
To obtain more information on the CFA635 family replacement, the CFA735 family, please send an email to support@crystalfontz.com. We will provide you the following when available:
|
| Availability: | Q4 2011:
|
| Price Change: | There is no scheduled price change to the CFA635 family at this time. Pricing will be reviewed on a monthly basis. |
| Attachment: | CFA635_EOL_Notes.pdf (75KB) |
Part Change Notice #10287
| Products Affected: | XES635BK-TFE-KU, XES635BK-TMF-KU, XES635BK-YYE-KU |
| Date Issued: | October 12, 2010 |
| Summary: | XES635BK Hardware v3.1 / Firmware v1.6 |
| Last revision: | XES635BK Hardware v1.0 / Firmware v1.4 |
| Description: | HARDWARE REVISION: v3.1 (2010-06-24) Changes since last revision (v1.0) By MET Laboratories: * Product complies with UL60950 CSA C22.2 No. 60950. Product safety certification for Canada, United States, and Europe. * Product complies to CE standards (European safety, health, and environmental standards). * Product passed EU ESD immunity (Electrostatic Discharge) and radiated immunity requirements with no anomalies. * Title 47 of the CFR, Part 15, Subpart B for a Class B Digital Device. * ICES-003 Issue 4, February 7, 2004, Class B. * Product materials are in compliance with the regulations related to the EU Directive 2006/121/EC for Registration, Evaluation, Authorization and Restriction of Chemicals (REACH). Also, by this date: * Cable meets requirements for demonstrating compliance with California Proposition 65. * Factories have ISO certification. * Improved backlight. Display is lit more evenly, contrast can be adjusted to higher, and lifetime is longer. (As of 2008/07/01). * Improved ESD (Electrostatic Discharge) protection for USB cable. Also improved cable strain relief. * We transitioned to an improved keypad from 10.5 millimeters to 12.00 millimeters high. FIRMWARE REVISION v1.6 (2010-05-01) Changes since last revision (v1.4) * Command 1 (0x01): Get Hardware & Firmware Version returns "CFA635:h1.1,v1.6". * Improved reset function to make module less sensitive to supply variations. * Fixed range checking for command 0 (0x00): Ping Command. |
| Reason: | Product improvement. |
| Availability: | Immediate |
| Price Change: | No |
Part Change Notice #10280
For reference only. For design purposes, please use the specifications in the datasheet.
| Quantity | Price |
|---|---|
| 1 | $127.44 |
| 10 * | $116.16 |
| 20 * | $110.52 |
| 50 * | $104.90 |
| 100 * | $93.68 |
| 200 * | $88.38 |
| 500 * | $79.32 |
| 1000 * | $73.66 |
| * These quantities may have up to 90 days lead time. | |
Quick Product Info
This part is not recommended for new designs.

