CFAG320240C Graphic LCD
This page for archive purposes only.
CFAG320240C was discontinued and replaced by the CFAG320240CX.
CFAG320240C was discontinued and replaced by the CFAG320240CX.
CFAG320240C-FMI-T:
This is a view of the entire FMI-T module. The text in the lower-right corner is on a separate plane, which is set to "XOR" with the main graphics plane.
This is a view of the entire FMI-T module. The text in the lower-right corner is on a separate plane, which is set to "XOR" with the main graphics plane.
(click image to see detail view)
CFAG320240C-FMI-T:
Here is a screen shot of a "dithered" monochrome image.
Here is a screen shot of a "dithered" monochrome image.
(click image to see detail view)
CFAG320240C-FMI-T:
This is another monochrome dithered image. In this image, each pixel is either on (100%) or off (0%).
This is another monochrome dithered image. In this image, each pixel is either on (100%) or off (0%).
(click image to see detail view)
CFAG320240C-FMI-T:
Here is the same image, but it is shown using the limited "grey scale" feature of the S1D13305 (SED1330). This mode allows a pixel to be 100%, 50% or 0%. The mode is composed of two full-sized graphic planes. The 100 percent pixels are set on one plane, and the 50% pixels are set on the second plane. The second plane is modulated by the controller at 17Hz with a 50% duty cycle. This makes a one-level gray scale, but does introduce some flickering of the 50% pixels.
Here is the same image, but it is shown using the limited "grey scale" feature of the S1D13305 (SED1330). This mode allows a pixel to be 100%, 50% or 0%. The mode is composed of two full-sized graphic planes. The 100 percent pixels are set on one plane, and the 50% pixels are set on the second plane. The second plane is modulated by the controller at 17Hz with a 50% duty cycle. This makes a one-level gray scale, but does introduce some flickering of the 50% pixels.
(click image to see detail view)
CFAG320240C-FMI-T:
A plane can be set to show text. This picture shows the 5x7 font that is built in to the S1D13305 (SED1330) controller. You can also define your own font in the controller's ram and have it displayed on a plane. Text can also be rendered by the host on the graphic planes.
A plane can be set to show text. This picture shows the 5x7 font that is built in to the S1D13305 (SED1330) controller. You can also define your own font in the controller's ram and have it displayed on a plane. Text can also be rendered by the host on the graphic planes.
(click image to see detail view)
CFAG320240C-FMI-T:
Here is the same text plane, but the graphics plane has been inverted. Since the text and graphics planes in this example are set to "XOR" mode, the text becomes inverted.
Here is the same text plane, but the graphics plane has been inverted. Since the text and graphics planes in this example are set to "XOR" mode, the text becomes inverted.
(click image to see detail view)
CFAG320240C-YMI-VZ: Front view
(click image to see detail view)
Back view
(click image to see detail view)
Features:
- Built-in Epson S1D13305 (SED1335) controller
- Multiple text and graphic layers
- Available in several variations of backlight and polarizer
- Wide temperature operation (-20°C to +70°C)
- Wide viewing angles
Documents:
1 to 1 Template: FMI-T, YMI-VZ (35KB)Metric Scale Drawing: FMI-T (20KB)
Metric Scale Drawing: YMI-VZ (26KB)
Datasheets