WR232Y01
RS-232 DB-9(female) to DB-9(female) 6´ straight through cable

This is a shielded 6´ RS232 cable that will connect our CFA632 or CFA634 serial displays to a standard 9-pin RS 232 connection as found on a PC or the USB232a converter above. Bulk packaged.

WRPWRY02
PC Power Supply to LED Backlight Power Cable

One end of this cable can be plugged into a spare power connector from your PC´s power supply. The other end (used with the supplied connector) plugs into our CFA632 or CFA634 serial LCDs. If this cable is ordered at the same time as the serial LCD, we will solder the connector to the LCD so you only have to plug things together. Bulk packaged.

WRUSBY03
USB A(male) to 2mm connector cable

  

USB "A" to LCD cable for the CFA631, CFA632-USB, CFA633-USB, CFA634-USB and CFA635, displays.

WR232Y04
RS-232 DB-9(female) to DB-9(female) 10´ straight through cable

This is a shielded 10´ RS232 cable that will connect our CFA632 or CFA634 serial displays to a standard 9-pin RS 232 connection as found on a PC or the USB232a converter above. Bulk packaged.

WRUSBY06
USB A(male) to A(female) 6´ extension cable

A high-quality 6´ USB extension cable. Bulk packaged.

WR232Y07
RS-232 DB-9(female) to DB-9(female) gender changer

Compact gender changer. This gender changer allows our serial displays to be connected to the USB232a converter.

WR232Y08
RS-232 DB-9(female) to 0.1" 2x5 (female), 27" ribbon cable

Use to connect a CFA633 to a PC´s 9-pin serial port.

WR232Y09
RS-232 DB-9(female) to DB-9(male) 36" ribbon cable with bracket
to fit PC expansion slot for CFA632* and CFA634* series modules

This is a 36" RS232 ribbon cable that has a bracket to fit a PC expansion slot. By using the WR232Y10 cable (below) in conjunction with this cable, one can connect our serial CFA632 or CFA634 displays to a standard 9-pin RS 232 connection as found on a PC or the USB232a converter (see USB232A, above). See detailed images.

WR232Y10
RS-232 DB-9(female) to DB-9(female) 13" straight through cable

This is a shielded 13" RS232 cable. By using this cable in conjunction with our WR232Y09 cable above, one can connect our CFA632 or CFA634 serial displays to a standard 9-pin RS 232 connection as found on a PC or the USB232a converter (see USB232A, above). See detailed images.

WRUSBY11
4 single pin connectors to 2mm connector cable, approximately 27" length

Cable to connect the CFA631, CFA632-USB, CFA633-USB, CFA634-USB and CFA635, displays to the USB header on your motherboard.

WRPWRY12
4 pin hard drive to floppy connector and hard drive splitter cable

  

Power cable splitter to add a "3 1/2 floppy" power connector to your system. Useful to supply power to a CFA633 or CFA633-USB.

WR232Y13
10 pin to DB-9(male) 36" ribbon cable with bracket
to fit PC expansion slot for CFA633* series modules


Click for detailed images.

This is a 36" RS232 ribbon cable that has a bracket to fit a PC expansion slot. By using the WR232Y10 cable in conjunction with this cable, one can connect the CFA633 to a standard 9-pin RS 232 connection as found on a PC or the USB232a converter (see USB232A, above). See detailed images.

WRPWRY14
CFA633 to ATX power supply and control cable

Click for detailed images.

This is the ATX power cable for the CFA633 or CFA633-USB, which allows you to turn on and off an ATX power supply, or power cycle a computer through the CFA633. See detailed images.

WRDOWY17
DS18B20 based temperature sensor for the CFA633 and the CFA631,CFA635 SCAB

Click for detailed images.

The WRDOWY17 is a temperature sensor featuring the Dallas/Maxim DS18B20. The WRDOWY17 takes advantage of the DS18B20´s ability to connect multiple sensors to one cable. This cable allows easy connection of up to 32 temperature sensors to the CFA633 or CFA633-USB as well as the CFA631,CFA635 SCAB. See detailed images.

WRFANX01
16" 3-pin Fan Extension Cable

Click for detailed images.

This is a 16" 3-pin fan extension cable. See detailed images.

WREXTY15
16", 16 Pin cable used to connect the CFA631 or CFA635 to the System Cooling Accessory Board (SCAB).

This is a 16 conductor cable that connects the CFA631 or CFA635
to the System Cooling Accessory Board (SCAB). Approximate length is 16". See detailed images.

WREXTY19
3.5", 16 Pin cable used to connect the CFA631 or CFA635 to the System Cooling Accessory Board (SCAB).

This is a 16 conductor cable that connects the CFA631 or CFA635
to the System Cooling Accessory Board (SCAB). Approximate length is 3.5". See detailed images.

WR232Y22
26", 10 pin to 10 pin cable used to connect the CFA633 to a 10 pin header, either normal or alternate pinout.

This is a 10 pin to 10 pin cable used to connect the CFA633 to a 10 pin header, either normal or alternate pinout. Approximate length is 26".

WR232Y23
26", DB9 to 10 pin cable used to connect the a serial LCD module to a 10 pin header, either normal or alternate pinout.

This is a DB9 to 10 pin cable used to connect the a serial LCD module to a 10 pin header, either normal or alternate pinout. Approximate length is 26".

WRPWRY24
26", PC Power Supply to 16 Pin Connector Cable.

This is a PC power supply to 16 pin connector cable used to connect power directly from the power supply to the CFA631 or CFA635 LCD module. Note that JP2 will need to be opened on the module when used with this cable to avoid back-powering the USB bus. Approximate length is 26".

WRPWRY25
11", ATX Power Switch cable for CFA631 and CFA635 series LCD modules.

This is a PC power supply to 16 pin connector cable used to connect power directly from the power supply to the CFA631 or CFA635 LCD module. This cable allows for ATX power switch functionality for the CFA631 and CFA635 series LCD modules without the use of a SCAB. Note that JP2 will need to be opened on the module when used with this cable to avoid back-powering the USB bus. Approximate length is 11".

USB232A
USB-to-Serial Converter connects serial displays or other serial peripherals to a USB port on your computer

Click for detailed images.

This sleek and compact USB to RS-232 converter will connects any RS-232 peripheral to your computer by using a USB port. The USB232A works great with our Intelligent Serial Displays. It simply appears to your software as the next serial port ("COM2" or "COM3" for instance). It installs in seconds and frees your computer´s RS-232 ports for other uses.

The USB232A is supplied in full retail packaging and includes the driver on a mini CD. Features include:

• Supports the RS232 Serial interface
• USB Specification v1.1 compliant
• Supports baud rates from 1200 to 115.2 kbps.
• Easy Installation
• Works with any RS-232 device or DB-9 male connector: cellular phones, PDAs, digital cameras, modems, ISDN terminal adapters and others.
• Frees your RS-232 ports for other uses
• Supports Windows® 98/2000/ME/XP as well as Linux and MacIntosh.

This converter has a male DB-9 RS-232 connector, just like a PC´s serial port. Either our WRPWRY02, WR232Y04, WR232Y07 or equivalent will be required to allow it to connect to one of our serial displays.

Download Drivers and Installation Instructions
View Detailed Photos of the converter.