Questions? Feedback? powered by Olark live chat software
Product Availability: We offer over 1600 products backed by excellent customer service and technical support. For many products, when you order today, we ship today. However, shortages and long lead times for some electronic components are common. Backorder ship dates and lead time estimates are listed in the shopping cart before you place an order. Please plan ahead and allow for product lead time. Thank you.
Intelligent Serial LCD Modules

110 VAC Power Supply

  • Cord Length: ~63 inches
  • INPUT: 90-240 VAC 50/60 HZ 0.2A 10VA
  • OUTPUT: 5v, 1.0A
  • UL Class 2 Construction FCC CE

CFA10040PWR
Quantity:

Quantity 1
Price $7.50

I2C LCD With Keypad – Dark Blue On White

The CFA533-***-KC series is a 16x2 I2C LCD with keypad. The I2C interface allows you to use just two lines (SDA & SCL) to have bi-directional communication with the I2C LCD. Other devices can also share those two I2C control lines with the LCD. Only 4 wires are needed to connect this I2C LCD: power, ground, SDA (I2C Serial DAta) and SCL (I2C Serial CLock).

The CFA533 can run on 3.3v to 5.0v directly, with no changes needed, so you do not need to do any level translation between your embedded processor and the I2C LCD. Simply power the CFA533 from the same supply as your processor and the I2C signal levels will match up.

Using only one address on your I2C bus, you can add all the elements that you need for your front panel. The CFA533 I2C LCD can also read up to 32 DS18B20 digital temperature sensors, giving you an easy way to integrate temperature sensing over the I2C bus. No additional firmware or pins are needed on the host system.

This CFA533-TFH variant features crisp, dark blue letters against a white, backlit background. The keypad has a matching white LED backlight. Since the LCD is a backlit positive FSTN, the CFA533-TFH I2C LCD is readable in direct sunlight, as well as complete darkness.

The CFA533 series is also available in other colors and interfaces.

Key Features

  • I2C host interface controls the LCD and reads the keypad.
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Integrated 16x2 LED backlit character LCD.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend with the popular arrows, enter and cancel layout.
  • Advanced digital GPIO control with PWM output.
  • Robust packet based communications protocol with CRC.
  • Non-volatile memory (EEPROM): Set the "power-on" display screen, plus 16-bytes for storing IP, netmask, or system serial number.
  • ATX power supply control functionality.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy using WR-DOW-Y17 DS18B20 temperature sensors.
  • Available in a 5.25" half-height LCD drive bay kit.
  • Easy to use with Arduino.
  • Sample applications and source code readily available: Arduino I2C LCD, cfTest,CrystalControl2, andLinux Examples.

CFA533TFHKC
Quantity:

Quantity 1 10 20 50 100 200 * 500 * 1000 *
Price $50.84 $49.36 $46.12 $42.90 $39.66 $36.42 $33.20 $29.94

This display has a logic level serial UART interface. This display is truly a front-panel solution, not just an LCD module. Designed to fit in a 1U server enclosure, it is by no means confined to one. This display can drive LEDs using the GPIOs provided, configure headless servers, or, with the right software, be a wired remote for your home theater PC.

It has four directional buttons, an enter (check) key, and cancel ('x') key. Instead of using a corruptible stream-based communication protocol, it uses a 16-bit CRC protected packet-based protocol to communicate with its host, meaning that line noise, environmental interference, etc., won't cause the display to start any process on your host unless it was actually initiated by a user. Because both the keypad and LCD are backlit, this display is great for low-light conditions.

The CFA533 is backward compatible with the CFA633 for its communication interface, but has added features such as 3.3v to 5v operating range, ability to change the keypad backlight brightness separately from the LCD backlight, a stainless steel bezel, and a single supply voltage for both logic and backlighting. Voltage compensated single-supply 3.3v to 5.5v operation allows the module to easily work with a wide variety of power supplies. The CFA533 is the logical progression for any application already using a CFA633, but not utilizing the CFA633 fan functionality. With all its features, this display is perfect for the display and user interface of your next project that requires an LCD and keypad without fan control.

The CFA533 logic level serial UART LCD is also available in white-on-blue (CFA533-TMI-KL) and dark-on-yellow-green (CFA533-YYH-KL) color styles.

  • Wide power supply voltage range (VDD = +3.3v to +5.5v) is perfect for embedded systems.
  • Contrast and backlights are fully compensated over the supply voltage range. No adjustments are needed to the contrast setting or backlight brightness over the full range of power supply input voltage.
  • Only a single supply is needed.
  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • Available in a 5.25" half-height LCD drive bay kit.
  • ATX power supply control functionality allows the buttons on the CFA-533 to replace the "power" and "reset" buttons on your system, simplifying your front panel design
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Non-volatile memory (EEPROM) capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.
  • The CFA533 is also available in USB: CFA533-TFH-KU, RS232: CFA533-TFH-KS and I2C: CFA533-TFH-KC interfaces.

CFA533TFHKL
Quantity:

Quantity 1 10 20 50 100 200 * 500 * 1000 *
Price $45.44 $44.12 $40.90 $37.66 $34.44 $31.22 $28.00 $24.76

This display has a serial interface with full swing RS232. This display is truly a front-panel solution, not just an LCD module. Designed to fit in a 1U server enclosure, it is by no means confined to one. This display can drive LEDs using the GPIOs provided, configure headless servers, or, with the right software, be a wired remote for your home theater PC.

It has four directional buttons, an enter (check) key, and cancel ('x') key. Instead of using a corruptible stream-based communication protocol, it uses a 16-bit CRC protected packet-based protocol to communicate with its host, meaning that line noise, environmental interference, etc., won't cause the display to start any process on your host unless it was actually initiated by a user. Because both the keypad and LCD are backlit, this display is great for low-light conditions.

The CFA533 is backward compatible with the CFA633 for its communication interface, but has added features such as 3.3v to 5v operating range, ability to change the keypad backlight brightness separately from the LCD backlight, a stainless steel bezel, and a single supply voltage for both logic and backlighting. Voltage compensated single-supply 3.3v to 5.5v operation allows the module to easily work with a wide variety of power supplies. The CFA533 is the logical progression for any application already using a CFA633, but not utilizing the CFA633 fan functionality. With all its features, this display is perfect for the display and user interface of your next project that requires an LCD and keypad without fan control.

The CFA533 full swing RS232 serial is also available in white-on-blue (CFA533-TMI-KS) and dark-on-yellow-green (CFA533-YYH-KS) color styles.

  • Wide power supply voltage range (VDD = +3.3v to +5.5v) is perfect for embedded systems.
  • Contrast and backlights are fully compensated over the supply voltage range. No adjustments are needed to the contrast setting or backlight brightness over the full range of power supply input voltage.
  • Only a single supply is needed.
  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • Available in a 5.25" half-height LCD drive bay kit.
  • ATX power supply control functionality allows the buttons on the CFA-533 to replace the "power" and "reset" buttons on your system, simplifying your front panel design
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Non-volatile memory (EEPROM) capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.
  • The CFA533 is also available in USB: CFA533-TFH-KU, logic level serial UART: CFA533-TFH-KL and I2C: CFA533-TFH-KC interfaces.

CFA533TFHKS
Quantity:

Quantity 1 10 20 50 100 200 * 500 * 1000 *
Price $47.05 $45.68 $42.34 $38.98 $35.66 $32.32 $28.98 $25.64

The CFA-533 is an intelligent 16x2 character USB LCD with a keypad. The USB interface allows you to easily connect the CFA-533 LCD to your host device using a USB cable. You can change the text displayed on the LCD, and read the keypad through the USB. The USB interface is implemented using a genuine FTDI FT232RL USB UART with rock-solid WHQL signed Windows drivers and is fully supported under Linux. The LCD's USB interface is exposed as a COM port, new software is easy to write and legacy applications are easy to support.

This CFA533-TFH variant features crisp, dark blue letters against a white, backlit background. The keypad has a matching white LED backlight. Since the LCD is a backlit positive FSTN, the CFA533-TFH USB LCD is readable in direct sunlight, as well as complete darkness. The CFA533 USB LCD is also available in white-on-blue (CFA533-TMI-KU) and dark-on-yellow-green (CFA533-YYH-KU) color styles.

The CFA-533 solves your entire front panel requirements in one simple, proven device. The 2x16 LCD display allows showing critical error or status messages, and the keypad can be used to interact with the user, all over the single USB connection. The CFA-533 USB display fits easily in the front panel of a 1U appliance.

The CFA-533 USB LCD can also reset your system as well as power it on and off using its ATX power supply control functionality. This way the CFA-533 can replace the ubiquitous power and reset switches while cleaning up the front panel design and simplifying your BOM and assembly.

With the CFA-533 USB LCD, you also get the great (and free) support that Crystalfontz is known for.

  • USB host interface controls the LCD and reads the keypad
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Integrated 16x2 LED backlit character LCD.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • Advanced digital GPIO control with PWM output.
  • Robust packet based communications protocol with CRC.
  • Non-volatile memory (EEPROM): Set the "power-on" display screen, plus 16-bytes for storing IP, netmask, or system serial number.
  • ATX power supply control functionality
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy using WRDOWY17 DS18B20 temperature sensors.
  • Available in a 5.25" half-height LCD drive bay kit.
  • Sample applications and source code readily available: CFTest,CrystalControl,Linux Examples
  • The CFA533 is also available in I2C: CFA533-TFH-KC, RS232: CFA533-TFH-KS and logic-level UART: CFA533-TFH-KL interfaces.

CFA533TFHKU
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $52.63 $51.10 $47.74 $44.42 $41.06 $37.70 $34.38 $31.00

I2C LCD With Keypad – White On Blue

Easy to use with Arduino.

The CFA533-***-KC series is a 16x2 I2C LCD with keypad. The I2C interface allows you to use just two lines (SDA & SCL) to have bi-directional communication with the I2C LCD. Other devices can also share those two I2C control lines with the LCD. Only 4 wires are needed to connect this I2C LCD: power, ground, SDA (I2C Serial DAta) and SCL (I2C Serial CLock).

The CFA533 can run on 3.3v to 5.0v directly, with no changes needed, so you do not need to do any level translation between your embedded processor and the I2C LCD. Simply power the CFA533 from the same supply as your processor and the I2C signal levels will match up.

Using only one address on your I2C bus, you can add all the elements that you need for your front panel. The CFA533 I2C LCD can also read up to 32 DS18B20 digital temperature sensors, giving you an easy way to integrate temperature sensing over the I2C bus. No additional firmware or pins are needed on the host system.

The CFA533-TMI display style has sharp white characters against a deep blue background. The keypad is backlit in a complementary blue. This I2C LCD is a backlit negative STN. The CFA533-TMI I2C LCD is viewable in any lighting condition from darkness to normal, bright office light. The CFA533-TMI negative STN is not recommended for use in full sunlight conditions. The CFA533 I2C LCD series is also available in dark-on-gray CFA533-TFH-KC and dark-on-yellow-green CFA533-YYH-KC color variants.

Key Features

  • I2C host interface controls the LCD and reads the keypad.
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Integrated 16x2 LED backlit character LCD.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend with the popular arrows, enter and cancel layout.
  • Advanced digital GPIO control with PWM output.
  • Robust packet based communications protocol with CRC.
  • Non-volatile memory (EEPROM): Set the "power-on" display screen, plus 16-bytes for storing IP, netmask, or system serial number.
  • ATX power supply control functionality.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy using WR-DOW-Y17 DS18B20 temperature sensors.
  • Easy to use with Arduino.
  • Available in a 5.25" half-height LCD drive bay kit. (When adding to cart)
  • Sample applications and source code readily available: Arduino I2C LCD, cfTest and CrystalControl2.
  • The CFA533 is also available in USB: CFA533-TMI-KU, RS232: CFA533-TMI-KS and logic-level UART: CFA533-TMI-KL interfaces.

CFA533TMIKC
Quantity:

Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
Price $50.84 $49.36 $46.12 $42.90 $39.66 $36.42 $33.20 $29.94

This display has a logic level serial UART interface. This display is truly a front-panel solution, not just an LCD module. Designed to fit in a 1U server enclosure, it is by no means confined to one. This display can drive LEDs using the GPIOs provided, configure headless servers, or, with the right software, be a wired remote for your home theater PC.

It has four directional buttons, an enter (check) key, and cancel ('x') key. Instead of using a corruptible stream-based communication protocol, it uses a 16-bit CRC protected packet-based protocol to communicate with its host, meaning that line noise, environmental interference, etc., won't cause the display to start any process on your host unless it was actually initiated by a user. Because both the keypad and LCD are backlit, this display is great for low-light conditions.

The CFA533 is backward compatible with the CFA633 for its communication interface, but has added features such as 3.3v to 5v operating range, ability to change the keypad backlight brightness separately from the LCD backlight, a stainless steel bezel, and a single supply voltage for both logic and backlighting. Voltage compensated single-supply 3.3v to 5.5v operation allows the module to easily work with a wide variety of power supplies. The CFA533 is the logical progression for any application already using a CFA633, but not utilizing the CFA633 fan functionality. With all its features, this display is perfect for the display and user interface of your next project that requires an LCD and keypad without fan control.

The CFA533 logic level serial UART LCD is also available in dark-on-gray (CFA533-TFH-KL) and dark-on-yellow-green (CFA533-YYH-KL) color styles.

  • Wide power supply voltage range (VDD = +3.3v to +5.5v) is perfect for embedded systems.
  • Contrast and backlights are fully compensated over the supply voltage range. No adjustments are needed to the contrast setting or backlight brightness over the full range of power supply input voltage.
  • Only a single supply is needed.
  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • Available in a 5.25" half-height LCD drive bay kit.
  • ATX power supply control functionality allows the buttons on the CFA-533 to replace the "power" and "reset" buttons on your system, simplifying your front panel design
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Non-volatile memory (EEPROM) capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.
  • The CFA533 is also available in USB: CFA533-TMI-KU, RS232: CFA533-TMI-KS and I2C: CFA533-TMI-KC interfaces.

CFA533TMIKL
Quantity:

Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
Price $45.44 $44.12 $40.90 $37.66 $34.44 $31.22 $28.00 $24.76

This display has a serial interface with full swing RS232. This display is truly a front-panel solution, not just an LCD module. Designed to fit in a 1U server enclosure, it is by no means confined to one. This display can drive LEDs using the GPIOs provided, configure headless servers, or, with the right software, be a wired remote for your home theater PC.

It has four directional buttons, an enter (check) key, and cancel ('x') key. Instead of using a corruptible stream-based communication protocol, it uses a 16-bit CRC protected packet-based protocol to communicate with its host, meaning that line noise, environmental interference, etc., won't cause the display to start any process on your host unless it was actually initiated by a user. Because both the keypad and LCD are backlit, this display is great for low-light conditions.

The CFA533 is backward compatible with the CFA633 for its communication interface, but has added features such as 3.3v to 5v operating range, ability to change the keypad backlight brightness separately from the LCD backlight, a stainless steel bezel, and a single supply voltage for both logic and backlighting. Voltage compensated single-supply 3.3v to 5.5v operation allows the module to easily work with a wide variety of power supplies. The CFA533 is the logical progression for any application already using a CFA633, but not utilizing the CFA633 fan functionality. With all its features, this display is perfect for the display and user interface of your next project that requires an LCD and keypad without fan control.

The CFA533 RS232 serial LCD is also available in dark-on-gray (CFA533-TFH-KS) and dark-on-yellow-green (CFA533-YYH-KS) color styles.

  • Wide power supply voltage range (VDD = +3.3v to +5.5v) is perfect for embedded systems.
  • Contrast and backlights are fully compensated over the supply voltage range. No adjustments are needed to the contrast setting or backlight brightness over the full range of power supply input voltage.
  • Only a single supply is needed.
  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • Available in a 5.25" half-height LCD drive bay kit.
  • ATX power supply control functionality allows the buttons on the CFA-533 to replace the "power" and "reset" buttons on your system, simplifying your front panel design
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Non-volatile memory (EEPROM) capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.
  • The CFA533 is also available in USB: CFA533-TMI-KU, I2C: CFA533-TMI-KC and logic-level serial UART: CFA533-TMI-KL interfaces.

CFA533TMIKS
Quantity:

Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
Price $45.44 $44.12 $40.90 $37.66 $34.44 $31.22 $28.00 $24.76

The CFA-533 is an intelligent 16x2 character USB LCD with a keypad. The USB interface allows you to easily connect the CFA-533 LCD to your host device using a USB cable. You can change the text displayed on the LCD, and read the keypad through the USB. The USB interface is implemented using a genuine FTDI FT232RL USB UART with rock-solid WHQL signed Windows drivers and is fully supported under Linux. The LCD's USB interface is exposed as a COM port, new software is easy to write and legacy applications are easy to support.

The CFA533-TMI display style has sharp white characters against a deep blue background. The keypad is backlight in a complementary blue. This LCD is a backlit negative STN: the CFA533-TMI USB LCD is viewable in any lighting condition from darkness to normal, bright office light. The CFA533-TMI negative STN is not recommended for use in full sunlight conditions. The CFA533 USB LCD is also available in dark-on-white (CFA533-TFH-KU) and dark-on-yellow-green (CFA533-YYH-KU) color variations.

The CFA-533 solves your entire front panel requirements in one simple, proven device. The 2x16 LCD display allows showing critical error or status messages, and the keypad can be used to interact with the user, all over the single USB connection. The CFA-533 USB display fits easily in the front panel of a 1U appliance.

The CFA-533 USB LCD can also reset your system as well as power it on and off using its ATX power supply control functionality. This way the CFA-533 can replace the ubiquitous power and reset switches while cleaning up the front panel design and simplifying your BOM and assembly.

With the CFA-533 USB LCD, you also get the great (and free) support that Crystalfontz is known for.

  • USB host interface controls the LCD and reads the keypad
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Integrated 16x2 LED backlit character LCD.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • Advanced digital GPIO control with PWM output.
  • Robust packet based communications protocol with CRC.
  • Non-volatile memory (EEPROM): Set the "power-on" display screen, plus 16-bytes for storing IP, netmask, or system serial number.
  • ATX power supply control functionality
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy using WRDOWY17 DS18B20 temperature sensors.
  • Available in a 5.25" half-height LCD drive bay kit.
  • Sample applications and source code readily available: CFTest,CrystalControl,Linux Examples
  • The CFA533 is also available in I2C: CFA533-TMI-KC, RS232: CFA533-TMI-KS and logic-level UART: CFA533-TMI-KL interfaces.

CFA533TMIKU
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $50.84 $49.36 $46.12 $42.90 $39.66 $36.42 $33.20 $29.94

I2C LCD With Keypad – Dark On Yellow-Green

The CFA533-***-KC series is a 16x2 I2C LCD with keypad. The I2C interface allows you to use just two lines (SDA & SCL) to have bi-directional communication with the I2C LCD. Other devices can also share those two I2C control lines with the LCD. Only 4 wires are needed to connect this I2C LCD: power, ground, SDA (I2C Serial DAta) and SCL (I2C Serial CLock).

The CFA533 can run on 3.3v to 5.0v directly, with no changes needed, so you do not need to do any level translation between your embedded processor and the I2C LCD. Simply power the CFA533 from the same supply as your processor and the I2C signal levels will match up.

Using only one address on your I2C bus, you can add all the elements that you need for your front panel. The CFA533 I2C LCD can also read up to 32 DS18B20 digital temperature sensors, giving you an easy way to integrate temperature sensing over the I2C bus. No additional firmware or pins are needed on the host system.

This CFA533-YYH variant shows crisp, dark letters against a yellow-green backlit background. The keypad is backlight in a matching yellow-green. Since the LCD is a backlit positive STN, the CFA533-YYH I2C LCD is easily viewable in all lighting conditions, from direct sunlight to a completely dark room. The CFA533 I2C LCD series is also available in dark-on-gray CFA533-TFH-KC and white-on-blue CFA533-TMI-KC color variants.

Key Features

  • I2C host interface controls the LCD and reads the keypad.
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Integrated 16x2 LED backlit character LCD.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend with the popular arrows, enter and cancel layout.
  • Advanced digital GPIO control with PWM output.
  • Robust packet based communications protocol with CRC.
  • Non-volatile memory (EEPROM): Set the "power-on" display screen, plus 16-bytes for storing IP, netmask, or system serial number.
  • ATX power supply control functionality.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy using WR-DOW-Y17 DS18B20 temperature sensors.
  • Available in a 5.25" half-height LCD drive bay kit.
  • Easy to use with Arduino.
  • Sample applications and source code readily available: Arduino I2C LCD, CFTest, CrystalControl2, and Linux Examples.
  • The CFA533 is also available in USB: CFA533-YYH-KU, RS232: CFA533-YYH-KS and logic-level UART: CFA533-YYH-KL interfaces.

CFA533YYHKC
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $49.81 $48.36 $45.12 $41.90 $38.66 $35.42 $32.20 $28.96

This display has a logic level serial UART interface. This display is truly a front-panel solution, not just an LCD module. Designed to fit in a 1U server enclosure, it is by no means confined to one. This display can drive LEDs using the GPIOs provided, configure headless servers, or, with the right software, be a wired remote for your home theater PC.

It has four directional buttons, an enter (check) key, and cancel ('x') key. Instead of using a corruptible stream-based communication protocol, it uses a 16-bit CRC protected packet-based protocol to communicate with its host, meaning that line noise, environmental interference, etc., won't cause the display to start any process on your host unless it was actually initiated by a user. Because both the keypad and LCD are backlit, this display is great for low-light conditions.

The CFA533 is backward compatible with the CFA633 for its communication interface, but has added features such as 3.3v to 5v operating range, ability to change the keypad backlight brightness separately from the LCD backlight, a stainless steel bezel, and a single supply voltage for both logic and backlighting. Voltage compensated single-supply 3.3v to 5.5v operation allows the module to easily work with a wide variety of power supplies. The CFA533 is the logical progression for any application already using a CFA633, but not utilizing the CFA633 fan functionality. With all its features, this display is perfect for the display and user interface of your next project that requires an LCD and keypad without fan control.

The CFA533 logic level serial UART LCD is also available in white-on-blue (CFA533-TMI-KL) and dark-on-gray (CFA533-TFH-KL) color styles.

  • Wide power supply voltage range (VDD = +3.3v to +5.5v) is perfect for embedded systems.
  • Contrast and backlights are fully compensated over the supply voltage range. No adjustments are needed to the contrast setting or backlight brightness over the full range of power supply input voltage.
  • Only a single supply is needed.
  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • Available in a 5.25" half-height LCD drive bay kit.
  • ATX power supply control functionality allows the buttons on the CFA-533 to replace the "power" and "reset" buttons on your system, simplifying your front panel design
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Non-volatile memory (EEPROM) capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.
  • The CFA533 is also available in USB: CFA533-YYH-KU, RS232: CFA533-YYH-KS and I2C: CFA533-YYH-KC interfaces.

CFA533YYHKL
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $44.41 $43.12 $39.90 $36.66 $33.44 $30.22 $27.00 $23.76

This display is truly a front-panel solution, not just an LCD module. Designed to fit in a 1U server enclosure, it is by no means confined to one. This display can drive LEDs using the GPIOs provided, configure headless servers, or, with the right software, be a wired remote for your home theater PC.

It has four directional buttons, an enter (check) key, and cancel ('x') key. Instead of using a corruptible stream-based communication protocol, it uses a 16-bit CRC protected packet-based protocol to communicate with its host, meaning that line noise, environmental interference, etc., won't cause the display to start any process on your host unless it was actually initiated by a user. Because both the keypad and LCD are backlit, this display is great for low-light conditions.

The CFA533 is backward compatible with the CFA633 for its communication interface, but has added features such as 3.3v to 5v operating range, ability to change the keypad backlight brightness separately from the LCD backlight, a stainless steel bezel, and a single supply voltage for both logic and backlighting. Voltage compensated single-supply 3.3v to 5.5v operation allows the module to easily work with a wide variety of power supplies. The CFA533 is the logical progression for any application already using a CFA633, but not utilizing the CFA633 fan functionality. With all its features, this display is perfect for the display and user interface of your next project that requires an LCD and keypad without fan control.

The CFA533 serial RS232 LCD is also available in white-on-blue (CFA533-TMI-KS) and dark-on-gray (CFA533-TFH-KS) color styles.

  • Wide power supply voltage range (VDD = +3.3v to +5.5v) is perfect for embedded systems.
  • Contrast and backlights are fully compensated over the supply voltage range. No adjustments are needed to the contrast setting or backlight brightness over the full range of power supply input voltage.
  • Only a single supply is needed.
  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • Available in a 5.25" half-height LCD drive bay kit.
  • ATX power supply control functionality allows the buttons on the CFA-533 to replace the "power" and "reset" buttons on your system, simplifying your front panel design
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Non-volatile memory (EEPROM) capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.
  • The CFA533 is also available in USB: CFA533-YYH-KU, I2C: CFA533-YYH-KC and logic-level serial UART: CFA533-YYH-KL interfaces.

CFA533YYHKS
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $44.41 $43.12 $39.90 $36.66 $33.44 $30.22 $27.00 $23.76

Looking for a USB compatible LCD with a keypad?
Our CFA-533 is the ideal solution when you need a highly readable usb character LCD and a keypad in one. This character display module integrates easily into both Windows ® & Linux devices.

The CFA-533 is an intelligent 16x2 character USB LCD with keypad. The USB interface allows you to easily connect the CFA-533 LCD to your host device using a USB cable. You can change the text displayed on the LCD, and read the keypad through the USB. The USB interface is implemented using a genuine FTDI FT232RL USB UART with rock-solid WHQL signed Windows drivers and is fully supported under Linux. The LCD's USB interface is exposed as a COM port, new software is easy to write and legacy applications are easy to support.

This CFA533-YYH variant shows crisp, dark letters against a yellow-green backlit background. The keypad is backlight in a matching yellow-green. Since the LCD is a backlit positive STN, the CFA533-YYH USB LCD is easily viewable in all lighting conditions, from direct sunlight to a completely dark room. The CFA533 USB LCD is also available in dark-on-white (CFA533-TFH-KU) and white-on-blue (CFA533-TMI-KU) configurations.

The CFA-533 solves your entire front panel requirements in one simple, proven device. The 2x16 LCD display allows showing critical error or status messages, and the keypad can be used to interact with the user, all over the single USB connection. The CFA-533 USB display fits easily in the front panel of a 1U appliance.

The CFA-533 USB LCD can also reset your system as well as power it on and off using its ATX power supply control functionality. This way the CFA-533 can replace the ubiquitous power and reset switches while cleaning up the front panel design and simplifying your BOM and assembly.

With the CFA-533 USB LCD, you also get the great (and free) support that Crystalfontz is known for.

  • USB host interface controls the LCD and reads the keypad
  • Compact size: fits in a 1U rack mount case (35mm overall height).
  • Integrated 16x2 LED backlit character LCD.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • Advanced digital GPIO control with PWM output.
  • Robust packet based communications protocol with CRC.
  • Non-volatile memory (EEPROM): Set the "power-on" display screen, plus 16-bytes for storing IP, netmask, or system serial number.
  • ATX power supply control functionality
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy using WRDOWY17 DS18B20 temperature sensors.
  • Available in a 5.25" half-height LCD drive bay kit.
  • Sample applications and source code readily available: CFTest,CrystalControl,Linux Examples
  • The CFA533 is also available in I2C: CFA533-YYH-KC, RS232: CFA533-YYH-KS and logic-level UART: CFA533-YYH-KL interfaces.

CFA533YYHKU
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $49.81 $48.36 $45.12 $41.90 $38.66 $35.42 $32.20 $28.96

Panel mountable 20x2 character LCD, USB interface, negative Blue STN with White edge LED backlight, 4 button keypad with blue LED backlight, GPIO.
Panel mount version of our CFA631-TMF-KU.

Modeled after our popular CFA631-TMF-KU, the CFA631P-TMF-KU doesn't need a drive bay. All it needs is a small space - 101.6mm wide (excluding mounting tabs), 25.4mm tall, and less than 18mm deep.

  • 20x2 USB LCD with keypad designed to fit as panel mount where vertical space and mounting depth is at premium
  • USB interface (115200 baud throughput)
  • LED backlit negative mode STN 20x2 LCD
  • Integrated LED backlit 4-button translucent silicon keypad
  • "key legends" allows user assignment of soft keys to be shown easily on the LCD
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Fully decoded keypad: any key combination is valid and unique
  • Robust packet-based communications protocol with 16-bit CRC
  • Built-in re-programmable microcontroller (factory operation)
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Hardware watchdog can reset host system on host software failure.
  • May be used with our optional SCAB to add fan and temperature sensor and fan functions.
  • Free sample code.

CFA631PTMFKU
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $58.42 $56.72 $52.72 $48.62 $44.52 $40.52 $36.42 $32.32

CFA631 USB LCD 20x2, four button keypad, RoHS / REACH compliant, Red LED Backlight, STN Negative Blue, Transmissive, 0°C to +50°C, 12:00 viewing angle

  • The only 20x2 USB LCD with keypad designed to fit in a PC's 3.5" floppy disk drive bay.
  • USB interface (115200 baud throughput)
  • LED backlit negative mode STN 20x2 LCD
  • Integrated LED backlit 4-button translucent silicon keypad
  • "key legends" allows user assignment of soft keys to be shown easily on the LCD
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Fully decoded keypad: any key combination is valid and unique
  • Robust packet-based communications protocol with 16-bit CRC
  • Built-in re-programmable microcontroller (factory operation)
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available in a LCD drive bay kit

CFA631RMFKU
Quantity:

Quantity 1 10 20 50 100 * 200 * 500 * 1000 *
Price $58.42 $56.72 $52.72 $48.62 $44.52 $40.52 $36.42 $32.32

USB 20x2 LCD module, four button keypad, RoHS / REACH compliant, White Edge LED Backlight, STN Negative Blue, Transmissive, 0°C to +50°C, 12:00 viewing angle

  • The only 20x2 USB LCD with keypad designed to fit in a PC's 3.5" floppy disk drive bay.
  • USB interface (115200 baud throughput)
  • LED backlit negative mode STN 20x2 LCD
  • Integrated LED backlit 4-button translucent silicon keypad
  • "key legends" allows user assignment of soft keys to be shown easily on the LCD
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Fully decoded keypad: any key combination is valid and unique
  • Robust packet-based communications protocol with 16-bit CRC
  • Built-in re-programmable microcontroller (factory operation)
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available in a LCD drive bay kit

CFA631TMFKU
Quantity:

Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
Price $58.42 $56.72 $52.72 $48.62 $44.52 $40.52 $36.42 $32.32

I2C interface, 16x2 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YDIKC
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $41.30 $40.10 $38.10 $36.20 $34.10 $32.20 $30.20 $28.20

Logic Level Serial, 16x2 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YDIKL
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $41.30 $40.10 $38.10 $36.20 $34.10 $32.20 $30.20 $28.20

Logic Level Serial (inverted) - 16x2 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YDIKN
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $41.30 $40.10 $38.10 $36.20 $34.10 $32.20 $30.20 $28.20

SPI interface, 16x2 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YDIKP
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $41.30 $40.10 $38.10 $36.20 $34.10 $32.20 $30.20 $28.20

Full-swing RS-232 serial, 16x2 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YDIKS
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $40.38 $39.20 $37.20 $35.30 $33.30 $31.40 $29.50 $27.50

16x2 USB character LCD module, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive, -20°C to +70°C operation, 6:00 viewing angle.

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The modules default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the "power-on" display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part numbers website page.

CFA632YDIKU
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $40.38 $39.20 $37.20 $35.30 $33.30 $31.40 $29.50 $27.50

I2C interface, 16x2 character LCD module, Yellow-Green LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YFHKC
Quantity:

Quantity 1 10 20 50 100 200 * 500 * 1000 *
Price $40.27 $39.10 $37.20 $35.20 $33.30 $31.30 $29.40 $27.50

Logic Level Serial, 16x2 character LCD module, Yellow-Green LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YFHKL
Quantity:

Quantity 1 10 20 50 100 200 * 500 * 1000 *
Price $40.27 $39.10 $37.20 $35.20 $33.30 $31.30 $29.40 $27.50

Logic Level Serial(inverted) - Yellow-Green LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YFHKN
Quantity:

Quantity 1 10 20 50 100 200 * 500 * 1000 *
Price $40.27 $39.10 $37.20 $35.20 $33.30 $31.30 $29.40 $27.50

16x2 SPI LCD character module with Yellow-Green LED Backlight and FSTN Positive, Transflective glass.

This LCD module can use any of SIX interfaces by simply changing the interface selection using a command setting and making the appropriate jumper configurations. (see color and interface options under product variants.)

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632's have two colors choices:

  • Yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  • Dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

RockWorks RW1067 controller.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YFHKP
Quantity:

Quantity 1 10 20 50 100 200 * 500 * 1000 *
Price $40.27 $39.10 $37.20 $35.20 $33.30 $31.30 $29.40 $27.50

Full-swing RS-232 serial, 16x2 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FSTN Positive, Transflective -20°C to +70°C operation, 6:00 viewing angle

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YFHKS
Quantity:

Quantity 1 10 20 50 100 200 * 500 * 1000 *
Price $39.35 $38.20 $36.30 $34.40 $32.50 $30.60 $28.70 $26.80

16x2 USB character LCD module, Yellow-Green LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA632 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

Large easy-to-read LCD in a compact size can display 16 characters x 2 lines. Overall module size is 108.00 mm width x 42.00 mm height x 19.90 mm depth (4.25" x 1.65" x 0.78"). Character height is 7.30 mm (0.29").

Optional PC CDROM mounting bracket with three choices of overlay for a single bay is available. Mounting dimensions are 5.25" (W) x 1" (H).

The CFA632 family has two colors choices:

  1. CFA632-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  2. CFA632-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark(near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.

Use any of six interfaces on any module in the CFA632 family by simply changing the interface selection in a command and using the appropriate jumper configurations.

The displays have a 6 o’clock viewing angle (polarizer viewing direction)

Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control command.

The modules have a RockWorks RW1067 controller.

.

Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller. Backlight is 5 volts only.

Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.

Wide temperature range for operation is -20°C to +70°C.

RoHS compliant. You can download the Certificate of Compliance for ISO, RoHS, and REACH from the Doc/Files tab on the part number’s website page.

CFA632YFHKU
Quantity:

Quantity 1 10 20 50 100 200 * 500 * 1000 *
Price $39.35 $38.20 $36.30 $34.40 $32.50 $30.60 $28.70 $26.80

16x2 Full-swing RS-232 serial LCD, Fan support, Keypad, RoHS / REACH Compliant, Red LED Backlight, FFSTN Negative, Transmissive, -20°C ~ +70°C operation, 6:00 viewing angle. The CFA633 serial LCD is also available in dark-on-gray (CFA633-TFH-KS), white-on-blue (CFA633-TMI-KS), and dark-on-yellow-green (CFA633-YYH-KS) color styles.

Backward compatible hardware and firmware with CFA633-RMC-KS v1.5x.

  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35 mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Four fan connectors with RPM monitoring or variable PWM fan power control
    NOTE: Not recommended for use with 4-Wire fans.
  • Available in a 5.25" half-height LCD drive bay kit, (see mounting bracket photos).
  • ATX power supply control functionality allows the buttons on the CFA-633 to replace the "power" and "reset" buttons on your system, simplifying your front panel design.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • "Fail-Safe" fan power setting allows safe host fan control based on temperature.
  • Non-volatile memory ("EEPROM") capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.

CFA633RDIKS
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $50.72 $49.24 $43.50 $40.74 $37.74 $35.00 $32.00 $29.24

16x2 USB character LCD module, Fans support, 6 button keypad, RoHS / REACH compliant, Red LED Backlight, FFSTN Negative, Transmissive, -20°C ~ +70°C operation, 6:00 viewing angle. The CFA633 USB LCD is also available in dark-on-gray (CFA633-TFH-KU), white-on-blue (CFA633-TMI-KU), and dark-on-yellow-green (CFA633-YYH-KU) color styles.

Backward compatible hardware and firmware with CFA633-RMC-KU v1.5x.

  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35 mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Four fan connectors with RPM monitoring or variable PWM fan power control.
    NOTE: Not recommended for use with 4-Wire fans.
  • Available in a 5.25" half-height LCD drive bay kit.
  • ATX power supply control functionality allows the buttons on the CFA-633 to replace the "power" and "reset" buttons on your system, simplifying your front panel design.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • "Fail-Safe" fan power setting allows safe host fan control based on temperature.
  • Non-volatile memory ("EEPROM") capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.

CFA633RDIKU
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $56.65 $55.00 $50.00 $47.50 $45.00 $42.50 $40.00 $37.24

16x2 Full-swing RS-232 serial LCD, Fan support, Keypad, RoHS / REACH Compliant, White LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle. The CFA633 serial LCD is also available in red-on-dark (CFA633-RDI-KS), white-on-blue (CFA633-TMI-KS), and dark-on-yellow-green (CFA633-YYH-KS) color styles.

  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35 mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Four fan connectors with RPM monitoring or variable PWM fan power control.
    NOTE: Not recommended for use with 4-Wire fans.
  • Available in a 5.25" half-height LCD drive bay kit, (see mounting bracket photos).
  • ATX power supply control functionality allows the buttons on the CFA-633 to replace the "power" and "reset" buttons on your system, simplifying your front panel design.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • "Fail-Safe" fan power setting allows safe host fan control based on temperature.
  • Non-volatile memory ("EEPROM") capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.

CFA633TFHKS
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $52.49 $50.96 $45.02 $42.16 $39.06 $36.22 $33.12 $30.26

16x2 USB character LCD module, Fans support, 6 button keypad, RoHS / REACH compliant, White LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle. The CFA633 USB LCD is also available in red-on-dark (CFA633-RDI-KU), white-on-blue (CFA633-TMI-KU), and dark-on-yellow-green (CFA633-YYH-KU) color styles.

  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35 mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Four fan connectors with RPM monitoring or variable PWM fan power control.
    NOTE: Not recommended for use with 4-Wire fans.
  • Available in a 5.25" half-height LCD drive bay kit.
  • ATX power supply control functionality allows the buttons on the CFA-633 to replace the "power" and "reset" buttons on your system, simplifying your front panel design.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • "Fail-Safe" fan power setting allows safe host fan control based on temperature.
  • Non-volatile memory ("EEPROM") capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.

CFA633TFHKU
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $58.65 $56.94 $51.76 $49.16 $46.58 $44.00 $41.40 $38.54

16x2 Full-swing RS-232 serial LCD, Fan support, Keypad, RoHS / REACH Compliant, White Edge LED Backlight, STN Negative Blue, Transmissive, -20°C to +70°C operation, 6:00 viewing angle. The CFA633 serial LCD is also available in dark-on-gray (CFA633-TFH-KS), red-on-dark (CFA633-RDI-KS), and dark-on-yellow-green (CFA633-YYH-KS) color styles.

Backward compatible hardware and firmware with CFA633-TMC-KS v1.5c.

  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35 mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Four fan connectors with RPM monitoring or variable PWM fan power control.
    NOTE: Not recommended for use with 4-Wire fans.
  • Available in a 5.25" half-height LCD drive bay kit, (see mounting bracket photos).
  • ATX power supply control functionality allows the buttons on the CFA-633 to replace the "power" and "reset" buttons on your system, simplifying your front panel design.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • "Fail-Safe" fan power setting allows safe host fan control based on temperature.
  • Non-volatile memory ("EEPROM") capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.

CFA633TMIKS
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $50.72 $49.24 $43.50 $40.74 $37.74 $35.00 $32.00 $29.24

16x2 USB character LCD module, Fans support, 6 button keypad, RoHS / REACH compliant, white LED backlight, STN Negative Blue, Transmissive, -20°C to +70°C operation, 6:00 viewing angle. The CFA633 USB LCD is also available in dark-on-gray (CFA633-TFH-KU), red-on-dark (CFA633-RDI-KU), and dark-on-yellow-green (CFA633-YYH-KU) color styles.

Backward compatible hardware and firmware with CFA633-TMC-KU v1.5c.

  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35 mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Four fan connectors with RPM monitoring or variable PWM fan power control.
    NOTE: Not recommended for use with 4-Wire fans.
  • Available in a 5.25" half-height LCD drive bay kit.
  • ATX power supply control functionality allows the buttons on the CFA-633 to replace the "power" and "reset" buttons on your system, simplifying your front panel design.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • "Fail-Safe" fan power setting allows safe host fan control based on temperature.
  • Non-volatile memory ("EEPROM") capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.

CFA633TMIKU
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $56.65 $55.00 $50.00 $47.50 $45.00 $42.50 $40.00 $37.24

16x2 Full-swing RS-232 serial LCD, Fan support, Keypad, RoHS / REACH Compliant, Yellow/Green LED Backlight, STN Positive Yellow/Green, Transflective -20°C to +70°C operation, 6:00 viewing angle. The CFA633 serial LCD is also available in dark-on-gray (CFA633-TFH-KS), white-on-blue (CFA633-TMI-KS), and dark-on-red (CFA633-RDI-KS) color styles.

Backward compatible hardware and firmware with CFA633-YYB-KS v1.5c.

  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35 mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Four fan connectors with RPM monitoring or variable PWM fan power control.
    NOTE: Not recommended for use with 4-Wire fans.
  • Available in a 5.25" half-height LCD drive bay kit, (see mounting bracket photos).
  • ATX power supply control functionality allows the buttons on the CFA-633 to replace the "power" and "reset" buttons on your system, simplifying your front panel design.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • "Fail-Safe" fan power setting allows safe host fan control based on temperature.
  • Non-volatile memory ("EEPROM") capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.

CFA633YYHKS
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $45.57 $44.24 $38.50 $35.50 $32.74 $29.74 $27.00 $24.00

16x2 USB character LCD module, Fans support, 6 button keypad, RoHS / REACH compliant, Yellow-Green LED Backlight, STN Positive, Yellow-Green, Transflective, -20°C to +70°C, 6:00 viewing angle. The CFA633 USB LCD is also available in dark-on-gray (CFA633-TFH-KU), white-on-blue (CFA633-TMI-KU), and red-on-dark (CFA633-RDI-KU) color styles.

Backward compatible hardware and firmware with CFA633-YYB-KU v1.5c

  • Robust packet based communications protocol with 16-bit CRC.
  • Compact size: fits in a 1U rack mount case (35 mm overall height).
  • Advanced digital GPIO control with PWM output.
  • Four fan connectors with RPM monitoring or variable PWM fan power control.
    NOTE: Not recommended for use with 4-Wire fans.
  • Available in a 5.25" half-height LCD drive bay kit.
  • ATX power supply control functionality allows the buttons on the CFA-633 to replace the "power" and "reset" buttons on your system, simplifying your front panel design.
  • Temperature monitoring: up to 32 channels at up to 0.5 deg C absolute accuracy. Ready-to-use WRDOWY17 Dallas Semiconductor 1-Wire temperature sensors are optional. Alternatively, you can create your own sensors using DS1822 or DS18B20 parts and the tutorial on creating temperature sensors.
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend.
  • "Fail-Safe" fan power setting allows safe host fan control based on temperature.
  • Non-volatile memory ("EEPROM") capability: Customize the "power-on" display settings plus a 16-byte "scratch" register for storing IP, netmask, system serial number, etc.

CFA633YYHKU
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $51.50 $50.00 $45.00 $42.50 $40.00 $37.24 $34.74 $32.24

I2C Interface, 20x4 LCD, RoHS / REACH Compliant, White Edge LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional Full Height Drive Bay mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Simple stream based communications.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TFHKC
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $51.81 $50.30 $47.50 $44.70 $42.00 $39.10 $36.40 $33.60

Logic Level Serial, 20x4 LCD, RoHS / REACH Compliant, White Edge LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional Full Height Drive Bay mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TFHKL
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $51.81 $50.30 $47.50 $44.70 $42.00 $39.10 $36.40 $33.60

Logic Level Serial (inverted) Interface, 20x4 LCD, RoHS / REACH Compliant, White Edge LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TFHKN
Quantity:

Quantity 1 20 50 100 200 500 * 1000 *
Price $56.00 $47.50 $44.70 $42.00 $39.10 $36.40 $33.60

SPI, 20x4 LCD, RoHS / REACH Compliant, White Edge LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional Full Height Drive Bay mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • >
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Simple stream based communications.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TFHKP
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $51.81 $50.30 $47.50 $44.70 $42.00 $39.10 $36.40 $33.60

Full swing RS-232 serial 20x4 LCD, RoHS / REACH Compliant, White Edge LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TFHKS
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $50.88 $49.40 $46.60 $43.90 $41.20 $38.40 $35.70 $32.90

USB 20x4 character LCD module, RoHS / REACH compliant, White Edge LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TFHKU
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $50.88 $49.40 $46.60 $43.90 $41.20 $38.40 $35.70 $32.90

I2C Interface, 20x4 LCD, RoHS / REACH Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TMIKC
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $50.78 $49.30 $46.60 $43.80 $41.10 $38.70 $35.70 $33.00

Logic Level Serial, 20x4 LCD, RoHS / REACH Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TMIKL
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $50.78 $49.30 $46.60 $43.80 $41.10 $38.70 $35.70 $33.00

Logic Level Serial (inverted) Interface, 20x4 LCD, RoHS / REACH Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TMIKN
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $50.78 $49.30 $46.60 $43.80 $41.10 $38.70 $35.70 $33.00

SPI Interface, 20x4 LCD, RoHS / REACH Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TMIKP
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $50.78 $49.30 $46.60 $43.80 $41.10 $38.70 $35.70 $33.00

Full swing RS-232 serial 20x4 LCD, RoHS / REACH Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TMIKS
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $49.85 $48.40 $45.70 $43.00 $40.30 $38.00 $35.00 $32.30

USB 20x4 character LCD module, RoHS / REACH compliant, White Edge LED Backlight, STN Negative Blue, Transmissive, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634TMIKU
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $49.85 $48.40 $45.70 $43.00 $40.30 $38.00 $35.00 $32.30

I2C interface, 20x4 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YDIKC
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $52.22 $50.70 $47.90 $45.10 $42.30 $39.40 $36.70 $33.90

Logic Level Serial, 20x4 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YDIKL
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $52.22 $50.70 $47.90 $45.10 $42.30 $39.40 $36.70 $33.90

Logic Level Serial (inverted) interface, 20x4 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YDIKN
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $52.22 $50.70 $47.90 $45.10 $42.30 $39.40 $36.70 $33.90

SPI interface, 20x4 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YDIKP
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $52.22 $50.70 $47.90 $45.10 $42.30 $39.40 $36.70 $33.90

Full swing RS-232 serial 20x4 LCD, RoHS / REACH Compliant, Yellow/Green LED Backlight, FFSTN Negative (black) Transmissive, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YDIKS
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $51.29 $49.80 $47.00 $44.30 $41.50 $38.70 $36.00 $33.20

USB 20x4 character LCD module, RoHS / REACH compliant, Yellow-Green LED Backlight, FFSTN Negative (black), Transmissive, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YDIKU
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $51.29 $49.80 $47.00 $44.30 $41.30 $38.70 $36.00 $33.20

I2C interface, 20x4 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YFHKC
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $50.26 $48.80 $46.10 $43.40 $40.70 $37.90 $35.30 $32.60

Logic Level Serial, 20x4 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YFHKL
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $50.26 $48.80 $46.10 $43.40 $40.70 $37.90 $35.30 $32.60

Logic Level Serial (inverted) interface, 20x4 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YFHKN
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $50.26 $48.80 $46.10 $43.40 $40.70 $37.90 $35.30 $32.60

SPI interface, 20x4 character LCD module, RoHS / REACH Compliant, Yellow-Green LED Backlight, FFSTN Negative (Black), Transmissive -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional Full Height Drive Bay mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Simple stream based communications.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YFHKP
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $50.26 $48.80 $46.10 $43.40 $40.70 $37.90 $35.30 $32.60

Full swing RS-232 serial 20x4 LCD, RoHS / REACH Compliant, Yellow/Green LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YFHKS
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $49.34 $47.90 $45.20 $42.60 $39.90 $37.20 $34.60 $31.90

USB 20x4 character LCD module, RoHS / REACH compliant, Yellow-Green LED Backlight, FSTN Positive, Transflective, -20°C to +70°C operation, 6:00 viewing angle.

The CFA634 can use any of SIX interfaces on any modules in the family by simply changing the interface selection using a command setting and making the appropriate jumper configurations. The interfaces are:

  1. CFA634-TFH-Kx: White edge-lit LED backlight with positive STN transflective mode. Displays dark (near-black) characters on light (near-white) background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  2. CFA634-TMI-Kx: White edge-lit LED backlight with negative STN transmissive mode LCD. Displays light (nearwhite) characters on a blue background. The display can be read in normal office lighting and in dark areas. Maybe difficult to read in direct sunlight.
  3. CFA634-YDI-Kx: Yellow-green array LED backlight with negative FFSTN transmissive mode LCD. Displays yellow-green characters on a dark (near-black) background. The display can be read in normal office lighting and in dark areas. May be difficult to read in direct sunlight.
  4. CFA634-YFH-Kx: Yellow-green array LED backlight with positive FSTN transflective mode LCD. Displays dark (near-black) characters on yellow-green background. The display can be read in normal office lighting, in dark areas, and in bright sunlight.
  • Large easy-to-read LCD in a compact size can display 20 characters x 4 lines. Overall module size is 130.00 mm, width x 63.00 mm height x 19.90 mm depth (5.12" x 2.48" x 0.78"). Character height is 7.30 mm (0.29").
  • Attractive stainless steel bezel.
  • Optional PC CDROM mounting bracket with three choices of overlay to fit two 5.25" wide bays is available.
  • The displays have a 6 o’clock viewing angle (polarizer viewing direction).
  • Adjustable contrast. The module’s default contrast value will be acceptable for many applications. If necessary, you can adjust the contrast by using control function.
  • The modules have a RockWorks RW1067 controller.
  • Extended voltage (9-15 volts for interfaces using DB9 connector) and 5 volts power inputs standard for the controller.
  • Backlight is 5 volts only.
  • Use the nonvolatile memory capability (EEPROM) to customize the “power-on” display settings.
  • Wide temperature range for operation is -20°C to +70°C.
  • RoHS compliant. You can download the Certificate of Compliance for ISO 9001:2008, RoHS, and REACH from the Datasheets & Files tab.

CFA634YFHKU
Quantity:

Quantity 1 10 20 50 100 200 500 * 1000 *
Price $49.34 $47.90 $45.20 $42.60 $39.90 $37.20 $34.60 $31.90

TTL / Logic level (0-5v) Serial 20x4 character LCD module with Keypad, White Edge LED Backlight, FSTN Positive, Transflective 0°C to +50°C operation, and 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial interface (115200 baud equivalent throughput)
    • KS and KS1 supports full swing RS-232 with CFARS-232 daughter board
    • KL supports 0 -5v logic level serial
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA-635 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in factory re-programmable microcontroller
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available with USB interface

CFA635TFEKL
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $74.98 $72.80 $68.10 $63.40 $58.70 $54.00 $49.30 $45.60

Full-Swing RS232 Serial 20x4 character LCD module, with Keypad, White Edge LED Backlight, FSTN Positive, Transflective 0°C to +50°C operation, and 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial interface (115200 baud equivalent throughput)
    • KS and KS1 supports full swing RS-232 with CFARS-232 daughter board
    • KL supports 0 -5v logic level serial
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA-635 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in factory re-programmable microcontroller
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available with USB interface

CFA635TFEKS
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $85.18 $82.70 $78.40 $73.20 $68.80 $64.40 $59.20 $54.10

USB 20x4 character LCD module, six button keypad, RoHS / REACH compliant, White Edge LED Backlight, FSTN Positive, Transflective, 0°C to +50°C operation, 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • USB interface for both power and data (115200 baud equivalent throughput)
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA-635 to replace the "power" and "reset" buttons on your system, simplifying your front panel design
  • Built-in factory re-programmable microcontroller
  • 5.25" half-height drive-bay mounting bracket available (optional)
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available in 2 serial interfaces
  • Available in a 5.25" half-height LCD drive bay kit, (Available when adding to cart.)
  • Available in a hard drive mounting tray (SLED) which allows you to mount a hardrive behind the display, saving valuable space in your enclosure and providing space for your display, System Cooling Accessory Board (SCAB) and a 3.5" disk drive

CFA635TFEKU
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $69.83 $67.80 $64.10 $60.40 $55.70 $51.00 $46.30 $42.60

TTL / logic level (0-5v) Serial 20x4 character LCD module with Keypad, White Edge LED Backlight, STN Negative, Blue, Transmissive 0°C to +50°C operation, 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial interface (115200 baud equivalent throughput)
    • KS and KS1 supports full swing RS-232 with CFARS-232 daughter board
    • KL supports 0 -5v logic level serial
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA-635 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in factory re-programmable microcontroller
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available with USB interface

CFA635TMFKL
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $72.92 $70.80 $66.10 $61.40 $56.70 $52.00 $47.30 $42.60

Full-Swing RS232 Serial 20x4 character LCD module, Keypad, White Edge LED Backlight, STN Negative, Blue, Transmissive 0°C to +50°C operation, and 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial interface (115200 baud equivalent throughput)
    • KS and KS1 supports full swing RS-232 with CFARS-232 daughter board
    • KL supports 0 -5v logic level serial
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA-635 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in factory re-programmable microcontroller
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available with USB interface

CFA635TMFKS
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $83.22 $80.80 $76.10 $71.40 $66.90 $62.00 $57.30 $52.60

USB 20x4 character LCD module, six button keypad, RoHS / REACH compliant, White Edge LED Backlight, STN Negative Blue, Transmissive, 0°C to +50°C operation, 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • USB interface for both power and data (115200 baud equivalent throughput)
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA-635 to replace the "power" and "reset" buttons on your system, simplifying your front panel design
  • Built-in factory re-programmable microcontroller
  • 5.25" half-height drive-bay mounting bracket available (optional)
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available in 2 serial interfaces
  • Available in a 5.25" half-height LCD drive bay kit, (Available when adding to cart)
  • Available in a hard drive mounting tray (SLED) which allows you to mount a hardrive behind the display, saving valuable space in your enclosure and providing space for your display, System Cooling Accessory Board (SCAB) and a 3.5" disk drive

CFA635TMFKU
Quantity:

Quantity 1 10 20 50 100 200 500 1000 *
Price $67.77 $65.80 $62.10 $58.40 $53.70 $49.00 $44.30 $39.60

TTL / Logic Level (0-5v) Serial 20x4 character LCD module, Keypad, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective, 0°C to +50°C operation, and 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial interface (115200 baud equivalent throughput)
    • KS and KS1 supports full swing RS-232 with CFARS-232 daughter board
    • KL supports 0 -5v logic level serial
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA-635 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in factory re-programmable microcontroller
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available with USB interface

CFA635YYEKL
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $68.91 $66.90 $62.40 $58.00 $53.50 $49.10 $44.70 $40.20

Full-Swing RS232 Serial 20x4 character LCD module, Keypad, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective, 0°C to +50°C operation, and 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial interface (115200 baud equivalent throughput)
    • KS and KS1 supports full swing RS-232 with CFARS-232 daughter board
    • KL supports 0 -5v logic level serial
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA-635 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in factory re-programmable microcontroller
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available with USB interface

CFA635YYEKS
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $79.21 $76.90 $72.40 $68.00 $63.50 $59.10 $54.70 $50.20

USB 20x4 character LCD module, six button keypad, RoHS / REACH compliant, Yellow-Green LED Backlight, STN Positive Yellow-Green, Transflective, 0°C to +50°C operation, 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • USB interface for both power and data (115200 baud equivalent throughput)
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA-635 to replace the "power" and "reset" buttons on your system, simplifying your front panel design
  • Built-in factory re-programmable microcontroller
  • 5.25" half-height drive-bay mounting bracket available (optional)
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Available in 2 serial interfaces
  • Available in a 5.25" half-height LCD drive bay kit, (see mounting bracket photos)
  • Available in a hard drive mounting tray (SLED) which allows you to mount a hardrive behind the display, saving valuable space in your enclosure and providing space for your display, System Cooling Accessory Board (SCAB) and a 3.5" disk drive

CFA635YYEKU
Quantity:

Quantity 1 10 20 50 100 200 500 1000
Price $63.76 $61.90 $58.40 $55.00 $50.50 $46.10 $41.70 $37.20

USB + Logic Level (0-5v) Serial 20x4 character LCD module with Keypad, White Edge LED Backlight, FSTN Positive, Transflective, -20°C to +70°C, 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial and USB interfaces (115200 baud equivalent throughput)
    • KT supports full swing RS-232 with CFARS-232 daughter board and USB simultaneously
    • KR supports 0-5v logic level serial and USB simultaneously
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37.5mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA735 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in microcontroller with field-upgradeable firmware
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Run STM32 embedded applications on the CFA735 hardware.
  • Open source firmware for CFA735 displays allows you to customize and write/run your own user code.

  • Did you know?
    Our CFA835-TFK is the exact same hardware, with graphic capabilities and direct access to the SD Card at the same low price.

    CFA735TFKKR
    Quantity:

    Quantity 1 10 20 50 100 200 * 500 * 1000 *
    Price $86.01 $83.50 $78.62 $73.74 $68.86 $63.98 $59.10 $54.22

    USB + Full Swing RS-232 20x4 character LCD module with Keypad, White Edge LED Backlight, FSTN Positive, Transflective, -20°C to +70°C, 12:00 viewing angle.
    Includes CFARS-232 daughter board for Full-Swing serial communications.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial and USB interfaces (115200 baud equivalent throughput)
    • KT supports full swing RS-232 with CFARS-232 daughter board and USB simultaneously
    • KR supports 0-5v logic level serial and USB simultaneously
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37.5mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA735 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in microcontroller with field-upgradeable firmware
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Run STM32 embedded applications on the CFA735 hardware.
  • Open source firmware for CFA735 displays allows you to customize and write/run your own user code.

  • Did you know?
    Our CFA835-TFK is the exact same hardware, with graphic capabilities and direct access to the SD Card at the same low price.

    CFA735TFKKT
    Quantity:

    Quantity 1 10 20 50 100 200 * 500 * 1000 *
    Price $96.31 $93.50 $88.62 $82.74 $76.86 $71.98 $67.10 $62.22

    USB + Logic Level (0-5v) Serial 20x4 character LCD module with Keypad, White Edge LED Backlight, Blue STN Negative, Transmissive, -20°C to +70°C, 12:00 viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial and USB interfaces (115200 baud equivalent throughput)
    • KT supports full swing RS-232 with CFARS-232 daughter board and USB simultaneously
    • KR supports 0-5v logic level serial and USB simultaneously
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37.5mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA735 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in microcontroller with field-upgradeable firmware
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Run STM32 embedded applications on the CFA735 hardware.
  • Open source firmware for CFA735 displays allows you to customize and write/run your own user code.

  • Did you know?
    Our CFA835-TML is the exact same hardware, with graphic capabilities and direct access to the SD Card at the same low price.

    CFA735TMLKR
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000
    Price $81.97 $79.58 $74.92 $70.28 $65.62 $60.98 $56.32 $51.68

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial and USB interfaces (115200 baud equivalent throughput)
    • KT supports full swing RS-232 with CFARS-232 daughter board and USB simultaneously
    • KR supports 0-5v logic level serial and USB simultaneously
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37.5mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA735 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in microcontroller with field-upgradeable firmware
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Run STM32 embedded applications on the CFA735 hardware.
  • Open source firmware for CFA735 displays allows you to customize and write/run your own user code.

  • Did you know?
    Our CFA835-TML is the exact same hardware, with graphic capabilities and direct access to the SD Card at the same low price.

    CFA735TMLKT
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000
    Price $92.27 $89.58 $84.92 $79.28 $73.62 $68.98 $64.32 $59.68

    USB + Logic Level (0-5v) Serial 20x4 LCD module with Keypad, Yellow-Green Edge LED Backlight, STN Positive, Yellow-Green, Transflective, -20°C to +70°C, 12:00 o'clock viewing angle.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial and USB interfaces (115200 baud equivalent throughput)
    • KT supports full swing RS-232 with CFARS-232 daughter board and USB simultaneously
    • KR supports 0-5v logic level serial and USB simultaneously
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37.5mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA735 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in microcontroller with field-upgradeable firmware
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Run STM32 embedded applications on the CFA735 hardware.
  • Open source firmware for CFA735 displays allows you to customize and write/run your own user code.

  • Did you know?
    Our CFA835-YYK is the exact same hardware, with graphic capabilities and direct access to the SD Card at the same low price.

    CFA735YYKKR
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000 *
    Price $82.19 $79.80 $75.14 $70.48 $65.80 $61.16 $56.48 $51.82

    USB + Full Swing RS-232 20x4 character LCD module with Keypad, Yellow-Green Edge LED Backlight, STN Positive, Yellow-Green, Transflective, -20°C to +70°C, 12:00. Includes CFARS-232 daughter board for Full-Swing serial communications.

  • LED backlit 20x4 LCD
  • Integrated LED backlit 6-button translucent silicon keypad with screened legend
  • Four bicolor (red + green) LEDs. The LEDs’ brightness can controlled by the host software, which allows mixing the LEDs to produce other colors (yellow and orange)
  • Three color options:
  • Fully decoded keypad: any key combination is valid and unique
  • LCD characters are contiguous in both X and Y directions to allow the host software to display "gapless" bar graphs in horizontal or vertical directions
  • Serial and USB interfaces (115200 baud equivalent throughput)
    • KT supports full swing RS-232 with CFARS-232 daughter board and USB simultaneously
    • KR supports 0-5v logic level serial and USB simultaneously
  • Robust packet based communications protocol with 16-bit CRC
  • Compact size: fits in a 1U rack mount case (37.5mm overall height)
  • ATX power supply control functionality allows the buttons on the CFA735 to replace the "power" and "reset" buttons on your system, simplifying your front panel design (requires additional cables or hardware).
  • Built-in microcontroller with field-upgradeable firmware
  • Non-volatile memory capability ("EEPROM"):
    • Customize the "power-on" display and LED settings
    • 16-byte "scratch" register for storing IP, netmask, system serial number
  • Run STM32 embedded applications on the CFA735 hardware.
  • Open source firmware for CFA735 displays allows you to customize and write/run your own user code.

  • Did you know?
    Our CFA835-YYK is the exact same hardware, with graphic capabilities and direct access to the SD Card at the same low price.

    CFA735YYKKT
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000 *
    Price $92.49 $89.80 $85.14 $80.48 $74.80 $69.16 $64.48 $59.82

    The CFA835 product series are intelligent graphic LCD modules that offer USB and Serial interface, 6 button keypad, 4 status LED's and 5 GPIO.

    Key Features
    • Versatile and reliable packet based communications with set of 61 commands simplifies programming for your particular application.
    • Commands include tools to draw lines, rectangles, and circles. For example, create a chart to display temperature fluctuations over time.
    • Five GPIOs can be used to control other devices or can be configured for optional ATX functionality.
    • Only a single supply is needed. Wide power supply voltage range (VDD= +3.3v to +5.0v) is perfect for embedded systems.
    • Made for the demands of a commercial environment, temperature operating range is 20°C to +70°C.
    • The 12:00 o'clock viewing angle ensures optimal viewing for your products viewed at or below eye level.
    • Fully decoded 6-button keypad allows key combinations. Large translucent silicone keys are responsive.
    • Edge-lit backlight with 12 LEDs, 6 per side.
    • Adjustable backlight and contrast. Backlight and contrast are fully voltage regulated over the power supply range.
    • Front of display has four bicolor (red + green) LED status lights. For example, green could indicate "acceptable speed" while yellow-orange indicates "heavy usage, slow".
    • Add multiple optional CFA-FBSCABs to customize your order for temperature sensing and fan controls (up to 256 temperature sensors and 64 fans).
    • Easily integrate the CFA835 into your design with choice to two types of optional mounting brackets.
    • Attractive stainless steel bezel or select from 4 overlay colors when used with a bracket.

    CFA835TFK
    Quantity:

    Quantity 1 10 20 50 100 200 * 500 * 1000 *
    Price $86.01 $83.50 $78.62 $73.74 $68.86 $63.98 $59.10 $54.22

    The CFA835 product series are intelligent graphic LCD modules that offer USB and Serial interface, 6 button keypad, 4 status LED's and 5 GPIO.

    CFA835-TML Features

    •    Versatile and reliable packet based communications with set of 61 commands simplifies programming for your particular application.
    •    Commands include tools to draw lines, rectangles, and circles. For example, create a chart to display temperature fluctuations over time.
    •    Five GPIOs can be used to control other devices or can be configured for optional ATX functionality.
    •    Only a single supply is needed. Wide power supply voltage range (VDD= +3.3v to +5.0v) is perfect for embedded systems.
    •    Made for the demands of a commercial environment, temperature operating range is 20°C minimum to +70°C maximum.
    •    The 12:00 o'clock viewing angle ensures optimal viewing for your products viewed at or below eye level.
    •    Fully decoded 6-button keypad allows key combinations. Large translucent silicone keys are responsive.
    •    Edge-lit backlight with 12 LEDs, 6 per side.
    •    Adjustable backlight and contrast. Backlight and contrast are fully voltage regulated over the power supply range.
    •    Front of display has four bicolor (red + green) LED status lights. For example, green could indicate "acceptable speed" while yellow-orange indicates "heavy usage, slow".
    •    Add multiple optional CFA-FBSCABs to customize your order for temperature sensing and fan controls (up to 256 temperature sensors and 64 fans).
    •    Easily integrate the CFA835 into your design with choice to two types of optional mounting brackets.
    •    Attractive stainless steel bezel or select from 4 overlay colors when used with a bracket.

    CFA835TML
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000
    Price $81.97 $79.58 $74.92 $70.28 $65.62 $60.98 $56.32 $51.98

    The CFA835 product series are intelligent graphic LCD modules that offer USB and Serial interface, 6 button keypad, 4 status LED's and 5 GPIO.

    CFA835-YYK Features

    • Versatile and reliable packet based communications with set of 61 commands simplifies programming for your particular application.
    • Commands include tools to draw lines, rectangles, and circles. For example, create a chart to display temperature fluctuations over time.
    • Five GPIOs can be used to control other devices or can be configured for optional ATX functionality.
    • Only a single supply is needed. Wide power supply voltage range (VDD= +3.3v to +5.0v) is perfect for embedded systems.
    • Made for the demands of a commercial environment, temperature operating range is 20°C minimum to +70°C maximum.
    • The 12:00 o'clock viewing angle ensures optimal viewing for your products viewed at or below eye level.
    • Fully decoded 6-button keypad allows key combinations. Large translucent silicone keys are responsive.
    • Edge-lit backlight with 12 LEDs, 6 per side.
    • Adjustable backlight and contrast. Backlight and contrast are fully voltage regulated over the power supply range.
    • Front of display has four bicolor (red + green) LED status lights. For example, green could indicate "acceptable speed" while yellow-orange indicates "heavy usage, slow".
    • Add multiple optional CFA-FBSCABs to customize your order for temperature sensing and fan controls (up to 256 temperature sensors and 64 fans).
    • Easily integrate the CFA835 into your design with choice to two types of optional mounting brackets.
    • Attractive stainless steel bezel or select from 4 overlay colors when used with a bracket.

    CFA835YYK
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000 *
    Price $82.19 $79.80 $75.14 $70.48 $65.80 $61.16 $56.48 $51.82

    Internet Ready Linux SOM, Freescale i.MX283 or i.MX287 Processor, 4.3 inch 480x800 full color TFT touchscreen, Ethernet and USB ports for ease of connectivity, Yocto desktop loaded and ready to go.

    A complete package that includes our CFA10036 ARM9 based Linux System On Module with:
    • Freescale i.MX283 or i.MX287 processor
    • optional "debug" 128x32 OLED
    • 4.3 inch 800*480 TFT touchscreen display
    • 10/100 Ethernet port
    • USB port
    • 128MB or 256MB DDR2 RAM (processor dependent)
    • μSD reader supports up to 64GB
    • 24 GPIO on easy-access 0.1” center header
    • Up to 108 GPIO on 1mm compression connector

    CFA920TS
    Quantity:

    Quantity 1 * 10 * 20 * 50 * 100 * 200 * 500 *
    Price $186.22 $180.80 $179.00 $177.00 $175.20 $173.20 $171.20

    Internet Ready Linux SOM, Freescale i.MX283 or i.MX287 Processor, 5.0 inch 800x480 full color TFT touchscreen, Ethernet and USB ports for ease of connectivity, Yocto desktop loaded and ready to go.

    A complete package that includes our CFA10036 with:
    • Freescale i.MX283 or i.MX287 processor
    • optional "debug" 128x32 OLED
    • 5.0 inch 800*480 TFT touchscreen display
    • 10/100 Ethernet port
    • USB port
    • 128MB or 256MB DDR2 RAM (processor dependent)
    • μSD reader supports up to 64GB
    • CFA10040PWR +5v, 1A power adapter
    • 24 GPIO on easy-access 0.1” center header
    • Up to 108 GPIO on 1mm compression connector

    CFA921TS
    Quantity:

    Quantity 1 * 10 * 20 * 50 * 100 * 200 * 500 *
    Price $189.11 $183.60 $181.60 $179.60 $177.80 $175.80 $173.80

    Add some dazzle to your project with this 1.44" diagonal graphic TFT display module. This small display packs 128x128 full color pixels into one square inch of active display area. It is a great choice when you need color and sharp detail while using minimal front panel space. At less than 5 grams, the display adds little weight to handheld devices.

    Thanks to the integrated Sitronix ST7735S or compatible controller, a single 3.3v source powers everything. The SPI host interface allows full read and write control of the display while using only 10 pins. The single bright white LED backlight has anode (A,+) and cathode (K, -) pins brought out on the Flexible Printed Circuit (FPC) tail. To connect, all you need is a standard 10-conductor, 0.5 mm ZIF socket such as Omron Electronics XF2L-1025-1A sold by Digi-Key.

    Need this module with a Touch Screen? Contact us about availability.

    Arduino + TFT Display Demo Using Simple SPI Interface

    While the SPI interface requires only a few lines to control this TFT LCD module, it is still possible to transfer data at a rate that supports 20 FPS (Frames Per Second) screen updates -- fast enough to play a full motion video:
    .

    The project write-up on how to connect it, including the Arduino Sketch is on our forum.

    To get started, download the free datasheet and SPI sample code. And of course Crystalfontz is always here to help you when you integrate this display into your application.

    CFAF128128B0145T
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000
    Price $7.52 $7.30 $5.98 $4.72 $3.86 $3.30 $3.00 $2.84

    The CFAF128160C-018T is a 1.77" 128x160 resolution color graphic TFT LCD display. This TFT offers an integrated controller, white LED backlight, and 16-bit parallel interface. The CFAF128160C series requires only a single 3v source for your supply and logic voltages and no external components for the display.

    • 128xRGBx160 full color graphic TFT module.
    • This display module has an integrated ILItek ILI9163C or compatible controller.
    • 16-bit parallel interface.
    • Operating temperature range is from -20°C to +70°C.
    • All of our TFT displays are RoHS compliant.
    • Crystalfontz America Incorporated is ISO 9001:2008 certified.

    CFAF128160C018T
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000
    Price $17.18 $16.68 $14.24 $12.48 $11.02 $9.98 $6.42 $5.56

    This 2" diagonal TFT display has an integrated controller, and can take images formatted as 18 (262K color), 16 (65K color) or 12( 4K color) bits per pixel. To simplify prototyping, we offer a kit with a breakout carrier board.(See ADDITIONAL OPTIONS below.)

    • 176xRGBx220 full color graphic TFT module
    • Built-in Sitronix ST7775R or compatible controller allows a single 3.3v supply for both power supply and logic.
    • 8-bit parallel interface
    • Operating temperature range is from -20°C to +70°C.
    • All of our TFT displays are RoHS compliant.
    • Crystalfontz America Incorporated is ISO 9001:2008 certified.

    Please contact Technical Support if you need assistance. Our staff is experienced and knowledgeable.

    CFAF176220U020T
    Quantity:

    Quantity 1 10 20 50 100 * 200 * 500 * 1000 *
    Price $18.33 $17.80 $15.26 $13.46 $11.92 $10.80 $7.08 $6.14

    This kit consists of a CFAF176220U-020T TFT LCD module mounted on a carrier board. The carrier board supports a current driver for the LED backlight of the display. It is available under Additional Options on the website page for CFAF176220U-020T.

    CFAF176220U020TCB
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 *
    Price $38.40 $37.28 $35.10 $32.82 $26.20

    This 3.2-inch diagonal RGB TFT display module is sharp and bright. For faster prototyping, buy the kit with a breakout carrier board.(See ADDITIONAL OPTIONS below.)

    Highlights

    • Full-color (262K) 240xRGBx320 display module consists of a TFT panel, a driver IC, an FFC/FPC flexible cable, and an LED backlight.
    • Active Area is 3.2" diagonal, 48.60 (W) x 64.80 (H) millimeters (1.91" (W) x 2.55" (H).
    • Host interface is 16-bit, 8080 parallel and SPI interfaces. Sample code is under the DATASHEETS & FILES tab below.
    • With an integrated Orise Tech OTM3225A or compatible controller, only a single 3.3v supply is required for both power supply and logic.
    • The display module's 45-pin FFC/FPC flexible cable mates with standard 0.5 mm ZIF sockets such as 609-1196-1-ND.
    • 9:00 o'clock viewing angle (polarizer viewing direction). Use in portrait or landscape orientation.
    • Operating temperature range is from -20°C to +70°C.
    • This display is RoHS compliant.
    • Crystalfontz America Incorporated is ISO 9001:2008 certified.

    Not what you were looking for? Please contact our tech support team to get assistance in finding the right display.

    • This product is no longer recommended for new designs
    CFAF240320A032T
    Quantity:

    Quantity 1 10 20 50 100 200 500 * 1000 *
    Price $36.03 $34.98 $32.06 $29.42 $26.60 $24.42 $15.74 $14.08

    This kit consists of a CFAF240320A-032T TFT LCD module mounted on a carrier board. The carrier board supports a current driver for the LED backlight of the display. It is also available under Additional Options on the website page for CFAF240320A-032T.

    • This product is backordered, expected on June 13, 2016
      To reserve stock, please place an order.
    • This product is no longer recommended for new designs
    CFAF240320A032TCB
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 *
    Price $60.36 $58.60 $55.22 $52.12 $41.08

    This 3.2-inch diagonal full-color (262K) 240xRGBx320 TFT display module with touchscreen will add some pizzazz to your design. To speed up prototyping, we offer this display as a kit with a Crystalfontz breakout carrier board.(See ADDITIONAL OPTIONS below.)

    Please NOTE: If you are migrating from the CFAF240320A-032T-TS, please be aware that the CFAF240320B1-032T-TS offers ONLY 8 bit / 16 bit parallel MCU interface.

    Thanks to the built-in Sitronix ST7789V or compatible controller, only a single 3.3v supply is needed for both power supply and logic. Electrical connection is simple as the cable mates with a ZIF connector.

    More Features

    • Detailed images on this TFT display are sharp and bright with a typical contrast ratio of 500:1.
    • Choose from host interface of 8-bit or 16-bit parallel.
    • The display module's 45-pin FFC/FPC flexible cable mates with standard 0.5 mm ZIF sockets such as 609-1196-1-ND available through Digi-Key.
    • The 12:00 o'clock viewing angle (polarizer viewing direction) can be used in portrait or landscape orientation.
    • Temperature operation range is from -20°C to +70°C.
    • This display is RoHS compliant.
    • Crystalfontz America Incorporated is ISO 9001:2008 certified.

    Need this module with a 3-wire or 4-wire SPI interface? Contact us about availability.

    CFAF240320B1032TTS
    Quantity:

    Quantity 1 10 20 50 100 200 500 * 1000 *
    Price $25.42 $24.68 $22.90 $21.44 $19.50 $17.88 $15.30 $13.72

    This kit consists of a CFAF240320B1-032T-TS TFT LCD module mounted on a carrier board. The carrier board supports a current driver for the LED backlight of the display. It is available under Additional Options on the website page for CFAF240320B1-032T-TS.

    • This product is backordered, expected on May 21, 2016
      To reserve stock, please place an order.
    CFAF240320B1032TTSCB
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $51.08 $49.34 $47.58 $46.10 $33.42 $31.78 $29.22 $27.64

    The CFAF240320H-022T is a 2.2" 240x320 color graphic TFT LCD display. This display has integrated controller, white LED backlight, 8-bit parallel interface and requires only a single 3v supply.

    • 240xRGBx320 full color graphic TFT module.
    • 2.2 inch diagonal display.
    • Built-in Raydium Semiconductor RM68090 or compatible controller.
    • 8-bit parallel interface
    • Wide Temperature Range
    • RoHS Compliant

    CFAF240320H022T
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000
    Price $19.10 $18.54 $15.98 $14.18 $12.60 $11.44 $8.66 $7.90

    This graphic display module is a 2.4" diagonal, full color TFT. Suitable for embedded applications, it is low-power, uses a white LED backlight, and has an integrated touch panel which has its connection brought out to the main TAB connector for the display.

    It has an on-board controller and 3v single voltage for supply and logic (backlight not included), so you can easily use any modern microcontroller to interface with this display. It uses an 8 or 16 bit parallel interface, specified via connections to the display.

    This module looks wonderful, displaying all information in living color.

    • 240xRGBx320 Full color graphic TFT module
    • Built-in Raydium RM68090 controller
    • 16/8 bit parallel interface
    • Wide Temperature Range
    • Touch panel included
    • RoHS Compliant
    • The connector on the CFAF240320K-024T-TS is a flex tail mated with a "COG" (chip on glass) display construction. This style of connector is designed to be soldered directly to corresponding pads on your PCB by using a hot-bar soldering machine. High volume contract manufacturers will be familiar with this type of construction and its assembly methods. There are hot-bar soldering machines made that are designed for prototype, rework or repair work of TAB connections.

    CFAF240320K024TTS
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000
    Price $19.57 $19.00 $16.38 $14.56 $12.92 $11.74 $9.12 $8.80

    This 3.0" diagonal, 240x400 pixel, full RGB color graphic TFT display module boasts a 38.88mm x 64.80mm active area.

    • Four parallel interface modes are available: 8-bit, 9-bit, 16-bit or 18-bit.
    • The integrated Orise OTM4001A 720-channel 6-bit source driver or compatible controller, allows a single 3.3v supply for both power supply and logic.
    • The 12:00 o'clock viewing angle (polarizer viewing direction) is ideal for products viewed at or below eye level.
    • Measuring 45.03 x 77.00 millimeters overall with the FPC folded, you can mount this display in portrait or landscape orientation.
      • In portrait orientation, the narrow width of this TFT works well with portable, handheld, or embedded systems.
      • In landscape orientation, the low profile of this TFT may be used for the user interface of 2U+ rack mount devices or in benchtop laboratory equipment such as power supplies, meters, and signal generators.
    • For mass production, the display's tab makes fast and easy connection possible using a hot bar soldering machine.
    • Temperature operation is from -20°C to +70°C.
    • This TFT is RoHS compliant.
    • Crystalfontz America, Incorporated is ISO 9001:2008 certified.

    Questions? Contact our highly rated headquarters-based Technical Support Team for help.

    CFAF240400D030T
    Quantity:

    Quantity 1 10 20 50 100 200 500 * 1000 *
    Price $26.10 $25.34 $22.50 $20.40 $18.30 $16.72 $12.40 $11.88

    This kit consists of a CFAF240400D-030T TFT LCD module mounted on a carrier board. The carrier board supports a current driver for the LED backlight of the display. It is available under Additional Options on the website page for CFAF240400D-030T.

    CFAF240400D030TCB
    Quantity:

    Quantity 1 10 20 50 * 100 *
    Price $52.49 $50.96 $47.98 $42.20 $39.30

    This kit consists of a CFAF240400D-030T TFT LCD module mounted on a carrier board with standoffs. The carrier board supports a current driver for the LED backlight of the display. It is available under Additional Options on the website page for CFAF240400D-030T.

    CFAF240400D030TCB1
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $54.00 $52.50 $49.50 $43.50 $40.50 $36.00 $31.00 $27.80

    For maximum flexibility, this 3.5-inch diagonal full color QVGA 320x240 TFT has lots of different interfaces: 8-bit/9-bit/16-bit/18-bit parallel (8080 or 6800); 16-bit or 18-bit "DOTCLK" RGB; or 3- or 4-wire SPI. For easy connection to your host, the FFC/FPC tail mates with easy-to-find ZIF sockets.

    To save time during prototype development, this TFT display module is available in a kit with a Crystalfontz breakout/carrier board.(See Under ADDITIONAL OPTIONS below.)

    For a touchscreen version of this display, we offer the CFAF320240F-035T-TS.

    Detailed Benefits

    • Active Area is 70.08 (W) x 52.56 (H) millimeters (2.76" (W) x 2.07" (H)).
    • The integrated Solomon Systech SSD2119 or compatible driver requires only a single 3.3v supply for both power and logic.
    • The display module has a built-in DC-DC converter for panel voltage.
    • The 50-pin FFC mates with standard 0.5 mm ZIF sockets such as HFJ150CT-ND and HFK150CT-ND available from Digi-Key.
    • 6:00 o'clock viewing angle (polarizer viewing direction). Can be used in either portrait or landscape orientation.
    • Operating temperature range is -20°C to +70°C.
    • This display is RoHS compliant.
    • Crystalfontz America Incorporated is ISO 9001:2008 certified.

    Free downloadable sample code is under the DATASHEETS & FILES tab below. Need more information? Feel free to contact our tech support team for assistance.

    CFAF320240F035T
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000
    Price $41.14 $39.94 $34.02 $31.42 $28.44 $26.08 $19.34 $17.86

    To improve user experience, this sharp looking 3.5-inch diagonal full color QVGA 320x240 TFT has a 4-wire resistive touchscreen. The 50-pin Flat Flexible Cable (FFC) mates with standard 0.5 mm ZIF sockets.

    For quick prototype development, this display is available in a kit with a Crystalfontz breakout/carrier board.(See Under ADDITIONAL OPTIONS below.)

    For this same TFT without a touch screen, see the CFAF320240F-035T-T display module.

      Highlights

    • Active Area is 3.5" diagonal, 70.08 (W) x 52.56 (H) mm (2.76" (W) x 2.07" (H)).
    • Choose from several interface modes to host:
      • 8-bit, 9-bit, 16-bit, and 18-bit parallel (8080 or 6800).
      • 16-bit or 18-bit "DOTCLK" RGB.
      • 3- or 4-wire SPI.
    • Thanks to the built-in Solomon Systech SSD2119 or compatible driver, only a single 3.3v supply is needed for both power and logic.
    • Built-in DC-DC converter for panel voltage.
    • The display module' s 50-pin FFC mates with standard 0.5 mm ZIF sockets such as HFJ150CT-ND and HFK150CT-ND available from Digi-Key.
    • The touch screen FFC/FPC (Flat Flexible Cable / Flexible Printed Circuit) mates with standard 4-position,1.00 mm pitch ZIF (Zero Insertion Force) connectors such as WM3749CT-ND (top contacts) or WM7937CT-ND (bottom contacts), which are available from Digi-Key.
    • 6:00 o'clock viewing angle (polarizer viewing direction) can be used in portrait or landscape orientation.
    • Temperature operation is from -20°C to +70°C.
    • To get you started, free downloadable sample code is under the DATASHEETS & FILES tab below.
    • This TFT and the optional carrier board are RoHS compliant.
    • Crystalfontz America, Incorporated is ISO 9001:2008 certified.

    We offer free and nonbinding consultation via phone, chat, or email to learn about your needs and answer your questions. No need to register first.

    CFAF320240F035TTS
    Quantity:

    Quantity 1 10 20 50 100 200 500 1000 *
    Price $40.81 $39.62 $37.88 $35.12 $31.86 $29.22 $22.14 $20.54

    This 3.5" 320x240 full color RGB graphic TFT LCD display module offers a capacitive touch screen.

    • Built-in Solomon Systech SSD1963 or compatible controller.
    • 8-bit parallel interface.
    • Operating temperature range from -40°C to 80°C.
    • This product is RoHS Compliant.
    • Crystalfontz America Inc. is ISO 9001:2008 certified.

    Need this module without a Touch Screen? Contact us about availability.

    CFAF320240L035TCTS
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $54.47 $52.88 $49.20 $46.08 $41.96 $38.48 $33.56 $30.52

    Customers in many different industries have chosen this full color graphic TFT display module for its stunning 320x480 pixel 3.5-inch diagonal active area. To quickly start working with this display before you buy a large quantity, we offer a complete development kit under the ADDITIONAL OPTIONS heading below. Simply plug in the kit's AC adapter and turn power on. A sample slideshow will start. The display can also be purchased mounted on a Crystalfontz designed carrier board.

    Need a touchscreen? The CFAF320480C5-035T-TS is the identical display module with a 4-wire resistive touchscreen.

    Highlights

    • As with all of our TFTs, only a single 3v source for both power and logic is needed.
    • The display has a built-in Himax HX8357-B or compatible display controller.
    • Host interface modes are:
      • 8-bit, 9-bit, 16-bit or 18-bit parallel interface to host.
      • 16-bit or 18-bit "DOTCLK" RGB interface.
      • 3- or 4-wire SPI.
    • As an added convenience, the white LED backlight has anode (A,+) and cathode (K, -) pins brought out on the FPC instead of requiring a separate backlight connection.
    • The 50-pin FPC mates with standard 0.5mm ZIF sockets such as HFJ150CT-ND and HFK150CT-ND, both available from Digi-Key.
    • This TFT display is RoHS compliant.
    • Crystalfontz America, Incorporated is ISO 9001:2008 certified.

    Buy with confidence. This TFT display module has a limited 1-year warranty and free technical support.

    CFAF320480C4035T
    Quantity:

    Quantity 1 10 20 50 100 200 * 500 * 1000 *
    Price $30.38 $29.50 $26.42 $24.42 $22.00 $20.18 $15.90 $12.56

    This 4.3" diagonal 480x272 262K color TFT LCD display with white LED backlight includes a resistive touch screen mounted on the panel.

    For fast prototyping, we offer this display as a kit with a Crystalfontz breakout carrier board.(See ADDITIONAL OPTIONS below.)

    Features:

    • The host interface for this graphic module is DOT-CLK interface / Generic RGB.
    • The display has the popular 6:00 o'clock viewing angle (polarizer viewing direction).
    • Operating temperature range is -20°C to +70°C.
    • All of our TFT displays are RoHS compliant.
    • Crystalfontz America Incorporated is ISO 9001:2008 certified.

    Would you like this module without a touchscreen? Contact us about availability.

    CFAF480272C2043TTS
    Quantity:

    Quantity 1 10 20 50 100 * 200 * 500 * 1000 *
    Price $65.34 $63.44 $59.30 $55.74 $50.82 $46.58 $32.88 $29.10

    This kit consists of a CFAF480272C2-043T-TS touchscreen TFT LCD module mounted on a carrier board. The carrier board supports a current driver for the LED backlight of the display. It is available under Additional Options on the website page for CFAF480272C2-043T-TS.

    • This product is backordered, expected on July 1, 2016
      To reserve stock, please place an order.
    CFAF480272C2043TTSCB
    Quantity:

    Quantity 1 * 10 * 20 * 50 * 100 *
    Price $117.48 $114.06 $108.26 $103.06 $93.86

    • 480xRGBx272 Full color graphic TFT module
    • Built-in Solomon Systech SSD1963 or compatible controller
    • Capacitive touch screen
    • 8-bit parallel interface
    • Wide Temperature Range
    • RoHS Compliant

    CFAF480272G043TCTS
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $63.06 $61.22 $57.14 $53.68 $48.90 $44.84 $39.10 $35.28

    The CFAF480640A-035T with transflective polarizer is a 3.5" sunlight readable, 480xRGBx640 / 640x480xRGB, 262K color, active matrix TFT. It has 6 bright white series LEDs for great visibility in low light conditions, while the transflective polarizer allows great visibility in direct sunlight. It uses the latest in AIFF/MVA technology so the image has high contrast and a wide viewing angle. This 640x480 TFT display is perfectly suited for both indoor and outdoor use.

    Need a touchscreen? The CFAF480640B-035T-TS is the identical display module with a 4-wire resistive touchscreen.

    With an active area of 53.57x71.42mm and a resolution of 640 x 480 (landscape) or 480 x 640 (portrait) pixels, this display has a very high pixel density. The controller in this sunlight readable TFT display is the Himax HX8363-A controller. which uses the standard RGB+SPI interface so you won't run into any trouble getting the display up and running. The logic voltage range of 2.3v to 3.3v was selected to allow direct connection to 3.3v processors.

    The 6 white LED series backlight (~19.2v) will typically require a current-controlled boost LED driver. The series LED configuration guarantees perfect current matching across the 6 LEDs. We have an example of a suitable LED driver circuit shown in the schematic of the CFA10065 breakout board. We think you'll be pleasantly surprised to see this display looking great for its expected lifetime of at least 50,000 hours -- longer if you dim or turn off the backlight when not in use.

    This display is perfect for situations with changing levels of ambient light from darkness to direct sunlight. Examples include in dash or dash mounted electronics, exterior status displays, cryogenic sleep chambers, and pod bay door controllers.

    This display is available as a standalone part but it can also be purchased as a Breakout Board + Display below. This breakout board brings LCD connections out to 0.1" center pins. Perfect for prototyping into your project.

    Alternatively, if you need something you can take out of the box and plug in, our Demonstration Kit is for you. Simply plug in the supplied power adapter and the demonstration board will start displaying a slide show on the display. No soldering or coding required.

    CFAF480640A035T
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $92.22 $89.53 $84.59 $80.46 $73.30 $67.13 $60.50 $46.72

    The CFAF480640B-035T-TS has a transflective polarizer, and therefore is sunlight readable. The TFT display resolution is 480x640 (portrait) 640x480 (landscape) (VGA, 480xRGBx640, 640x480xRGB), can display 262,000 colors, uses active matrix addressing, and measures 3.5" diagonally. This display also features a 4-wire resistive touch screen, which allows the use of the touch screen while wearing gloves and other insulating materials. It has 10 bright white, series LEDs and the transflective polarizer looks great both in the sun and in the dark. It uses a polarizer specifically designed to provide a wide viewing cone from all sides of the display. This TFT display is perfectly suited for both indoor and outdoor use. Did we mention that the transflective polarizer makes it fully readable in direct sunlight? That same direct sunlight makes the viewing of ordinary TFT displays extremely difficult, but the CFAF480640B-035T-TS is unaffected.

    Do you like the display but don't need the touch screen? The CFAF480640A-035T is the same TFT without a touch screen. It is slightly thinner and the price is lower.

    With an active area of 53.57x71.42mm and a resolution of 640 x 480 (landscape) or 480 x 640 (portrait), this display has a very high pixel density. The Himax HX8363-A or compatible controller in this sunlight readable TFT display is the HX8363A which exposes a generic RGB interface so you won't run into any trouble getting the display up and running. The logic voltage range of 2.5v to 3.3v allows direct connection to 3.3v processors.

    The 10 white LED series backlight ( ~29.5v typical) will require a current-controlled boost LED driver. The series LED configuration guarantees perfect current matching across the 10 LEDs. We have an example of a suitable LED driver circuit shown in the schematic of the CFA10065 breakout board. We think you'll be pleasantly surprised to see this display looking great for its expected lifetime of at least 20,000 hours -- longer if you dim or turn off the backlight when not in use.

    This display is perfect for situations with changing levels of ambient light from darkness to direct sunlight. Examples include in dash or dash mounted electronics, exterior status displays, software keypads, and hypersonic railgun coordinate entry systems.

    This display is available as a standalone part but it can also be purchased with a Breakout Board + Display below. This breakout board brings LCD connections out to 0.1" center pins, and includes the current controlled backlight driver. Perfect for prototyping into your project.

    Alternatively, if you need something you can take out of the box and plug in, our Demonstration Kit is for you. Simply plug in the supplied power adapter and the demonstration board will start displaying a slide show on the display. No soldering or coding required.

    Not sure what the practical differences are between transflective and transmissive? See the embedded video for a demonstration

    CFAF480640B035TTS
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $118.60 $115.14 $109.32 $104.06 $94.76 $86.80 $79.28 $74.82

    480xRGBx800 full color graphic 4" diagonal TFT display. Integrated Himax HX8369-A or compatible controller and white LED backlight. Several interface modes allows compatibility with many different microcontroller configurations. Requires only a single source 3v for both power and logic.

    This display is supported by the powerful CFA10036 SOM (System On Module) with an OLED, the CFA10036 development board, and the CFA10055 carrier board. You can order a kit to easily work with this module.

    CFAF480800FT2040T
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $66.56 $64.62 $60.42 $56.84 $51.80 $47.50 $39.18 $37.60

    480xRGBx800 262k full color graphic 4.3 inch TFT Display module. White LED backlight. Includes 4 wire Resistive Touch Screen.

    CFAF480800T07043TTS
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $59.20 $57.48 $55.50 $52.12 $47.48 $43.54 $39.18 $33.02

    800xRGBx480 262k full color graphic 5 inch TFT Display module.White LED backlight. Includes 4 wire Resistive Touch Screen.

    CFAF800480A050TTS
    Quantity:

    Quantity 1 10 20 50 100 * 200 * 500 * 1000 *
    Price $91.05 $88.40 $83.48 $79.36 $72.30 $66.22 $49.18 $43.92

    With a generously sized 5.0 inch diagonal active area, this active matrix LCD is perfect for when you need to display a lot of information.

    Key Specifications

    • Full-color (262K) 800xRGBx480 display module consists of a TFT panel, a driver IC, an FFC/FPC flexible cable, and an LED backlight. The display module does not include an onboard LCD controller.
    • Requires a 5v supply.
    • Host interface is DOT-CLK interface / Generic RGB.
    • 6:00 o'clock viewing angle (polarizer viewing direction) can be rotated for portrait or landscape orientation.
    • Operating temperature range is from -20°C to +70°C.
    • This display is RoHS compliant.
    • Crystalfontz America Incorporated is ISO 9001:2008 certified.

    Every TFT display module comes with a limited 1-year warranty and free technical support.

    CFAF800480C1050T
    Quantity:

    Quantity 1 10 20 50 100 * 200 * 500 * 1000 *
    Price $82.28 $79.88 $75.18 $71.14 $64.88 $59.44 $43.06 $38.00

    • The FB System Cooling Accessory Board adds the same fan and temperature cooling functions to our CFA735 and CFA835 Intelligent LCD Displays that are available natively (without accessory board) on our CFA533 and CFA633 Intelligent LCD displays.
    • For cooling, add up to four fans with RPM monitoring and variable PWM fan power control. Connect fans to the CFA-FBSCAB with our 3-pin fan extension cable, WR-FAN-X01.
    • Monitor temperatures with up to 0.5°C absolute accuracy. Add up to 16 WR-DOW-Y17 Dallas Semiconductor 1-Wire (DOW) temperature sensors to use with the CFA735 or up to 32 temperature sensors for the CFA835.
    • For a CFA835, up to 32 CFA-FBSCABs can be connected to each other (“daisy chained”). Maximum configuration will allow 128 fans and 512 temperature sensors.
    • 4 GPIO lines on the CFA-FBSCAB plus CFA835 allows:
      • ATX power supply control functionality. Use CFA735 or CFA835 display module keypad buttons as "power" and "reset" buttons for your host system.
      • Hardware watchdog can reset the host in the case of host software failure.
      • Advanced digital GPIO control with PWM output.
    • The CFA-FBSCAB plus CFA735 or CFA835 fit nicely in a 1U rack mount case (37 mm overall height) using our optional mounting bracket. Or buy the SLED chassis that holds the display module, CFA-FBSCAB, and a 3.5-inch disk drive. To order a complete Drive Bay Kit, see our Kit Configurator.

    CFAFBSCAB
    Quantity:

    Quantity 1 20 50 200
    Price $21.10 $20.32 $19.54 $18.76

    122x32 Graphic LCD, RoHS Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive -20°C to +70°C 6:00

    • Form compatible with the CFAH1602A Series of Character LCD modules. Upgrade your product that uses a CFAH1602A character display by switching to this graphic CFAG12232A, or, lower your costs by replacing this graphic with that character module
    • 122x32 Graphic LCD Module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Avant SBN1661G or compatible controller (SED1520 compatible)
    • 8-bit parallel interface

    CFAG12232ATMITA
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $15.70 $15.24 $12.82 $11.08 $9.72 $8.76 $7.74 $7.10

    122x32 Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective -20°C to +70°C 6:00

    • Form compatible with the CFAH1602A Series of Character LCD modules. Upgrade your product that uses a CFAH1602A character display by switching to this graphic CFAG12232A, or, lower your costs by replacing this graphic with that character module
    • 122x32 Graphic LCD Module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Avant SBN1661G or compatible controller (SED1520 compatible)
    • 8-bit parallel interface

    CFAG12232AYYHTA
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $13.86 $13.46 $11.22 $9.56 $8.38 $7.52 $6.64 $6.12

    122x32 Graphic LCD, RoHS Compliant, No Backlight, STN Positive, Yellow/Green, Reflective -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator

    • Form compatible with the CFAH1602S Series of Character LCD modules. Upgrade your product that uses a CFAH1602S character display by switching to this graphic CFAG12232D, or, lower your costs by replacing the CFAG12232D with a CFAH1602S
    • Built-in Avant SBN1661G or compatible controller (SED1520 compatible)
    • 8-bit parallel interface
    • Ultra thin ( < 6mm )

    CFAG12232DNYGVA
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $14.73 $14.30 $11.98 $10.28 $9.02 $8.12 $7.16 $6.54

    122x32 Graphic LCD, RoHS Compliant, Yellow/Green Edge LED Backlight, STN Positive, Yellow/Green, Reflective -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator

    • Form compatible with the CFAH1602S Series of Character LCD modules. Upgrade your product that uses a CFAH1602S character display by switching to this graphic CFAG12232D, or, lower your costs by replacing the CFAG12232D with a CFAH1602S
    • Built-in Avant SBN1661G or compatible controller (SED1520 compatible)
    • 8-bit parallel interface
    • Ultra thin ( < 6mm )

    CFAG12232DYYHVA
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $16.15 $15.68 $13.22 $11.44 $10.06 $9.08 $8.00 $7.32

    122x32 Graphic LCD, RoHS Compliant, White Edge LED Backlight, FSTN Positive, Transflective -20°C to +70°C 6:00

    • 122x32 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Avant SBN1661G or compatible controller (SED1520 compatible)
    • 8-bit parallel interface

    • This product is backordered, expected on May 22, 2016
      To reserve stock, please place an order.
    CFAG12232JTFHTA
    Quantity:

    Quantity 1 * 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $16.85 $16.36 $13.82 $11.98 $10.54 $9.52 $8.42 $7.72

    122x32 Graphic LCD, RoHS Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive -20°C to +70°C 6:00

    • 122x32 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Avant SBN1661G or compatible controller (SED1520 compatible)
    • 8-bit parallel interface

    CFAG12232JTMITA
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $16.27 $15.80 $13.30 $11.50 $10.10 $9.10 $8.04 $7.40

    122x32 Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective -20°C to +70°C 6:00

    • 122x32 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Avant SBN1661G or compatible controller (SED1520 compatible)
    • 8-bit parallel interface

    CFAG12232JYYHTA
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $14.44 $14.02 $11.72 $10.00 $8.76 $7.86 $6.96 $6.42

    122x32 Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective -20°C to +70°C 6:00

    • 122x32 graphic LCD module
    • Built-in Avant SBN1661G or compatible controller (SED1520 compatible)
    • 8-bit parallel interface
    • Ultra thin ( < 6mm )

    CFAG12232KYYHTA
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $16.32 $15.84 $13.34 $11.52 $10.14 $9.14 $8.06 $7.42

    128x128 Graphic LCD, RoHS Compliant, High Output White Edge LED Backlight, FSTN Negative, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x128 graphic LCD module
    • Built-in Toshiba T6963C or compatible controller
    • 128x128 graphic mode --or-- 21 x 16 text mode using built-in 5x7 Character Generator ROM.
    • Available in several variations of backlight and polarizer (minimum order may be required)

    CFAG128128ASTITZ
    Quantity:

    Quantity 1 10 *
    Price $45.92 $44.58

    128x128 Graphic LCD, RoHS Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x128 graphic LCD module
    • Built-in Toshiba T6963C or compatible controller
    • 128x128 graphic mode --or-- 21 x 16 text mode using built-in 5x7 Character Generator ROM.
    • Available in several variations of backlight and polarizer (minimum order may be required)

    CFAG128128ATMITZ
    Quantity:

    Quantity 1 10 20 50 100 * 200 * 500 * 1000 *
    Price $43.63 $42.36 $39.26 $36.26 $32.92 $30.22 $26.58 $24.20

    128x128 Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive Yellow/Green, Transflective, -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation.

    • 128x128 graphic LCD module
    • Built-in Toshiba T6963C or compatible controller
    • 128x128 graphic mode --or-- 21 x 16 text mode using built-in 5x7 Character Generator ROM.
    • Available in several variations of backlight and polarizer (minimum order may be required)

    CFAG128128AYYHTZ
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $44.35 $43.06 $39.98 $36.88 $33.48 $30.74 $27.06 $24.60

    This product is End-of-Life and availability is limited. The product will be discontinued once current inventory is depleted. We suggest the CFAG128128I-TFH-VZ as a possible replacement.

    As the price has been reduced on remaining stock, these displays are perfect for a one-off or hobby project. As with all Crystalfontz displays, full technical support is included but we cannot accept returns.

    128x128 Graphic LCD, RoHS Compliant, White Edge LED Backlight, FSTN Positive, Transflective -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator

    • Built-in Neotec NT7086 segment driver and Sanyo LC7981 controller)
    • 128x128 graphic mode --or-- 21 x 16 text mode using built-in 5x7 Character Generator ROM.
    • Available in several variations of backlight and polarizer (minimum order may be required)

    • This product is no longer recommended for new designs
    CFAG128128BTFHVZ
    Quantity:

    Quantity 1 *
    Price $3.99

    This product is End-of-Life and availability is limited. The product will be discontinued once current inventory is depleted. We suggest the CFAG128128I-TMI-VZ as a possible replacement.

    As the price has been reduced on remaining stock, these displays are perfect for a one-off or hobby project. As with all Crystalfontz displays, full technical support is included but we cannot accept returns.

    • Built-in Neotec NT7086 segment driver and Sanyo LC7981 controller
    • 128x128 graphic mode --or-- 21 x 16 text mode using built-in 5x7 Character Generator ROM.
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Wide temperature range: -20°C to 70°C (-4°F to 158°F)
    • RoHS Compliant

    • This product is no longer recommended for new designs
    CFAG128128BTMIVZ
    Quantity:

    Quantity 1
    Price $3.99

    128x128 Graphic LCD, RoHS Compliant, RA6963 controller, White LED Backlight, FSTN Positive, Transflective -20°C to +70°C 6:00 viewing angle, Negative Voltage Generator

    • Built-in RAiO RA6963 controller and Neotec NT7086 segment driver
    • 128x128 graphic mode, Character Generator ROM (T6963C code 0101).
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Wide temperature range: -20°C to 70°C (-4°F to 158°F)
    • RoHS Compliant

    CFAG128128ITFHVZ
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $30.24 $29.36 $26.46 $24.26 $21.84 $20.02 $16.66 $15.30

    128x128 Graphic LCD, RoHS Compliant, RA6963 controller, White Edge LED Backlight, STN Blue Negative, Transmissive -20°C to +70°C 6:00 viewing angle, Negative Voltage Generator

    • Built-in RAiO RA6963 controller and Neotec NT7086 segment driver
    • 128x128 graphic mode, Character Generator ROM (T6963C code 0101).
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Wide temperature range: -20°C to 70°C (-4°F to 158°F)
    • RoHS Compliant

    CFAG128128ITMIVZ
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $30.78 $29.90 $27.00 $24.76 $22.30 $20.46 $17.04 $15.34

    128x128 Graphic LCD, RoHS Compliant, RA6963 controller, Yellow-green LED Backlight, Positive STN yellow-green, Transflective -20°C to +70°C 6:00 viewing angle, Negative Voltage Generator

    • Built-in RAiO RA6963 controller and Neotec NT7086 segment driver
    • 128x128 graphic mode, Character Generator ROM (T6963C code 0101).
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Wide temperature range: -20°C to 70°C (-4°F to 158°F)
    • RoHS Compliant

    CFAG128128IYYHVZ
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $33.22 $32.26 $29.38 $26.98 $24.36 $22.34 $18.62 $16.76

    Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive, Gray, Transflective -20°C to +70°C 6:00

    • 128x32 graphic LCD module
    • Built-in Sitronix ST7920 or compatible controller
    • 8-bit parallel interface

    CFAG12832AYGHN
    Quantity:

    Quantity 200 * 500 * 1000 *
    Price $12.70 $9.96 $7.78

    This is a 2.9" 128x64 graphic LCD module 3 color RGB LED backlight, FSTN Positive Light Gray, Transflective.

    • Viewing angle of 6:00.
    • On board negative voltage.
    • Built-in Neotec NT7107C controller, compatible with Samsung's S6B0107 / S6B0108 (formerly KS0107 / KS0108) controller.
    • A demonstration board is available.
    • Operating temperature range is from -20°C to 70°C.
    • RoHS compliant.
    • Crystalfontz America Inc. is ISO 9001:2008 certified.

    CFAG12864ACFHVN
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $24.26 $23.56 $20.82 $19.02 $17.04 $15.60 $13.82 $12.64

    This is a 2.9" 128x64 graphic LCD module with white edge LED backlight, STN Negative Blue, Transmissive.

    • Viewing angle of 6:00.
    • On board negative voltage.
    • This product series is available in several variations of backlight and polarizer.
    • Built-in Neotec NT7107C controller, compatible with Samsung's S6B0107 / S6B0108 (formerly KS0107 / KS0108) controller.
    • Can be used used as drop-in replacement for the PG12864-A/K.
    • A demonstration board is available.
    • Operating temperature range is from -20°C to 70°C.
    • RoHS compliant.
    • Crystalfontz America Inc. is ISO 9001:2008 certified.

    CFAG12864ATMIVN
    Quantity:

    Quantity 1 10 20 50 100 200 500 * 1000 *
    Price $24.56 $23.84 $20.86 $18.92 $16.90 $15.44 $13.62 $12.38

    This is a 2.9" 128x64 graphic LCD module, STN Positive Yellow Green, LED backlight, Transflective.

    • Viewing angle of 6:00.
    • On board negative voltage.
    • This product series is available in several variations of backlight and polarizer.
    • Built-in Neotec NT7107C controller, compatible with Samsung's S6B0107 / S6B0108 (formerly KS0107 / KS0108) controller.
    • Customers have used as drop-in replacement for the PG12864-A/K.
    • Customers have used as drop-in replacement for the Hyundai HG12646R-DYO display used in Allen Bradley Panel View 300 family of graphic terminals.
    • A demonstration board is available.
    • Operating temperature range is from -20°C to 70°C.
    • RoHS compliant.
    • Crystalfontz America Inc. is ISO 9001:2008 certified.

    CFAG12864AYYHVN
    Quantity:

    Quantity 1 5 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $20.50 $17.90 $16.00 $14.60 $13.50 $12.50 $11.66 $10.10 $9.12

    Graphic LCD, RoHS Compliant, White Edge LED Backlight, FSTN Positive, Transflective -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108
    • Demonstration board available here: CFA-10006

    CFAG12864BTFHV
    Quantity:

    Quantity 1 10 20 50 100 200 500 * 1000 *
    Price $21.51 $20.88 $18.06 $16.20 $14.40 $13.12 $11.58 $10.50

    Graphic LCD, RoHS Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108
    • Demonstration board available here: CFA-10006

    CFAG12864BTMIV
    Quantity:

    Quantity 1 10 20 50 100 200 500 * 1000 *
    Price $21.12 $20.50 $17.68 $15.82 $14.06 $12.80 $11.28 $10.24

    This product is End-of-Life and availability is limited. The product will be discontinued once current inventory is depleted. No direct replacements are available, however a similar CFAG12864B module may fit your needs. Please contact our Tech Support team for more information.

    As the price has been reduced on remaining stock, these displays are perfect for a one-off or hobby project. As with all Crystalfontz displays, full technical support is included but we cannot accept returns.

    (EOL)Graphic LCD, RoHS Compliant, White EL Backlight, STN Positive, Gray, Transflective -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108
    • Demonstration board available here: CFA-10006

    • This product is no longer recommended for new designs
    CFAG12864BWGHV
    Quantity:

    Quantity 1
    Price $3.99

    Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective -20°C to +70°C 6:00

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108
    • Demonstration board available here: CFA-10006

    CFAG12864BYYHN
    Quantity:

    Quantity 1 10 20 50 100 * 200 * 500 * 1000 *
    Price $19.30 $18.74 $16.04 $14.16 $12.54 $11.38 $10.02 $9.10

    Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108
    • Demonstration board available here: CFA-10006

    CFAG12864BYYHV
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $20.35 $19.76 $17.00 $15.12 $13.42 $12.20 $10.74 $9.76

    This is a 128x64 Graphic LCD with White Edge LED Backlight, STN Negative, Blue, Transmissive display with temperature compensation.

    • Viewing angle of 6:00.
    • On board negative voltage.
    • Built-in Samsung S6B0107 controller.
    • A demonstration board is available.
    • Operating temperature range is from -20°C to 70°C.
    • RoHS compliant.
    • Crystalfontz America Inc. is ISO 9001:2008 certified.

    CFAG12864CTMITN
    Quantity:

    Quantity 1 10 20 50 100 200 * 500 * 1000 *
    Price $19.78 $19.20 $16.66 $14.88 $13.24 $12.04 $10.12 $9.20

    A 128x64 Graphic LCD, Yellow/Green LED Backlight, STN Positive Yellow/Green, Transflective display with Temperature Compensation.

    • Viewing angle of 6:00.
    • On board negative voltage.
    • Built-in Samsung S6B0107 controller.
    • A demonstration board is available.
    • Operating temperature range is from -20°C to 70°C.
    • RoHS compliant.
    • Crystalfontz America Inc. is ISO 9001:2008 certified.

    CFAG12864CYYHTN
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $20.92 $20.32 $17.70 $15.94 $14.20 $12.94 $10.88 $9.88

    128x64 Graphic LCD, RoHS Compliant, High Output White Edge LED Backlight, FSTN Negative, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Toshiba T6963C or compatible compatible controller

    CFAG12864DSTITZ
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $35.49 $34.46 $31.40 $28.74 $25.94 $23.78 $20.96 $19.08

    128x64 Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Toshiba T6963C or compatible controller

    CFAG12864DYYHTZ
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $31.60 $30.68 $27.54 $25.12 $22.60 $20.70 $18.24 $16.58

    128x64 Graphic LCD, RoHS Compliant, High Output White Edge LED Backlight, FSTN Negative, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Toshiba T6963C or compatible controller

    CFAG12864FSTITY
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $35.35 $34.32 $31.20 $28.54 $25.76 $23.62 $20.82 $18.96

    128x64 Graphic LCD, RoHS Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Toshiba T6963C or compatible controller

    CFAG12864FTMITY
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $33.97 $32.98 $29.82 $27.26 $24.56 $22.52 $19.84 $18.04

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Wide temperature range: -20°C to 70°C (-4°F to 158°F)
    • Built-in Toshiba T6963C or compatible controller
    • RoHS Compliant

    CFAG12864FYYHTY
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $31.89 $30.96 $27.78 $25.34 $22.80 $20.88 $18.40 $16.74

    128x64 Graphic LCD, RoHS Compliant, High Output White Edge LED Backlight, FSTN Negative, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Toshiba T6963C or compatible controller

    CFAG12864GSTITY
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $35.99 $34.94 $31.84 $29.14 $26.32 $24.12 $21.26 $19.36

    128x64 Graphic LCD, RoHS Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Toshiba T6963C or compatible controller

    CFAG12864GTMITY
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $33.31 $32.34 $29.16 $26.64 $24.00 $22.00 $19.38 $17.62

    128x64 Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective, -20°C to +70°C, 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation.

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Toshiba T6963C or compatible controller

    CFAG12864GYYHTY
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $32.09 $31.16 $27.98 $25.54 $22.98 $21.04 $18.54 $16.86

    128x64 Graphic LCD, RoHS Compliant, High Output White Edge LED Backlight, FSTN Negative, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108
    • Demonstration board available here: CFA-10006

    CFAG12864ISTITN
    Quantity:

    Quantity 1 10 20 50 100 * 200 * 500 * 1000 *
    Price $23.24 $22.56 $19.64 $17.76 $15.84 $14.48 $12.72 $11.62

    This 2.9" diagonal 128x64 graphic LCD has white edge LED backlight with STN negative blue transmissive display.

    • 6:00 viewing angle.
    • Negative Voltage Generator.
    • Temperature Compensation.
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108
    • Demonstration board available here: CFA-10006
    • Operating temperature range from -20°C to +70°C.
    • RoHS Compliant.
    • Crystalfontz America Inc. is ISO 9001:2008 certified.

    CFAG12864ITMITN
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $22.27 $21.62 $18.72 $16.82 $14.98 $13.66 $12.04 $10.98

    128x64 Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive Yellow/Green, Transflective, -20°C to +70°C, 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation.

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108
    • Demonstration board available here: CFA-10006

    CFAG12864IYYHTN
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $20.58 $19.98 $17.16 $15.24 $13.52 $12.28 $10.74 $9.64

    128x64 Graphic LCD, RoHS Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Sitronix ST7920 or compatible controller

    CFAG12864JTMITT
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $26.29 $25.52 $22.46 $20.42 $18.26 $16.70 $14.74 $13.40

    128x64 Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in Sitronix ST7920 or compatible controller

    CFAG12864JYYHTT
    Quantity:

    Quantity 1 10 20 50 * 100 * 200 * 500 * 1000 *
    Price $24.76 $24.04 $21.06 $19.10 $17.06 $15.60 $13.76 $12.52

    128x64 Graphic LCD, RoHS Compliant, High Output White Edge LED Backlight, FSTN Negative, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108
    • Demonstration board available here: CFA-10006

    CFAG12864KSTITN
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $23.24 $22.56 $19.64 $17.76 $15.84 $14.48 $12.60 $11.14

    128x64 Graphic LCD, RoHS Compliant, White Edge LED Backlight, STN Negative, Blue, Transmissive -20°C to +70°C 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108

    CFAG12864KTMITN
    Quantity:

    Quantity 1 10 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $22.27 $21.62 $18.72 $16.82 $14.98 $13.66 $12.04 $10.98

    128x64 Graphic LCD, RoHS Compliant, Yellow/Green LED Backlight, STN Positive Yellow/Green, Transflective, -20°C to +70°C, 6:00 viewing angle. Negative Voltage Generator, Temperature Compensation

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Built-in controller: Samsung KS0107/KS0108
    • Demonstration board available here: CFA-10006

    CFAG12864KYYHTN
    Quantity:

    Quantity 1 10 20 50 100 200 * 500 * 1000 *
    Price $20.21 $19.62 $16.82 $14.92 $13.22 $12.00 $11.80 $9.66

    A graphic LCD with White Edge LED Backlight, STN Negative, Blue, Transmissive and temperature compensation.

    • Viewing angle of 6:00.
    • On board negative voltage.
    • This product series is available in several variations of backlight and polarizer.
    • Built-in Samsung S6B0107 controller.
    • A demonstration board is available.
    • Operating temperature range is from -20°C to 70°C.
    • RoHS compliant.
    • Crystalfontz America Inc. is ISO 9001:2008 certified.

    CFAG12864MTMITN
    Quantity:

    Quantity 1 * 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $25.11 $24.38 $21.36 $19.40 $17.34 $15.84 $13.98 $12.72

    A graphic LCD, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective and with temperature compensation.

    • Viewing angle of 6:00.
    • On board negative voltage.
    • This product series is available in several variations of backlight and polarizer.
    • Built-in Neotec NT7107C controller, compatible with Samsung's S6B0107 / S6B0108 (formerly KS0107 / KS0108) controller.
    • A demonstration board is available.
    • Operating temperature range is from -20°C to 70°C.
    • RoHS compliant.
    • Crystalfontz America Inc. is ISO 9001:2008 certified.

    CFAG12864MYYHTN
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $23.65 $22.96 $20.02 $18.14 $16.20 $14.80 $13.06 $11.90

    128x64 Graphic LCD, White Edge LED Backlight, STN Negative, Blue, Transmissive, Positive Voltage Generator

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Wide temperature range: -20°C to 70°C (-4°F to 158°F)
    • Built-in Sitronix ST7920 or compatible controller
    • Chinese Fonts in CGROM
    • Can be initialized like an HD44780 compatible 16x4 display
    • RoHS Compliant

    CFAG12864STMIVT
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $20.42 $19.82 $17.28 $15.56 $13.86 $12.64 $10.54 $9.50

    128x64 Graphic LCD, Yellow/Green LED Backlight, FSTN Negative, Transmissive -20°C to +70°C 6:00 viewing angle, Positive Voltage Generator

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Wide temperature range: -20°C to 70°C (-4°F to 158°F)
    • Built-in Sitronix ST7920 or compatible controller
    • Chinese Fonts in CGROM
    • Can be initialized like an HD44780 compatible 16x4 display
    • RoHS Compliant

    CFAG12864SYTIVT
    Quantity:

    Quantity 1 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $22.76 $22.10 $19.24 $17.42 $15.54 $14.18 $11.68 $10.64

    128x64 Graphic LCD, Yellow/Green LED Backlight, STN Positive, Yellow/Green, Transflective -20°C to +70°C 6:00 viewing angle, Positive Voltage Generator

    • 128x64 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Wide temperature range: -20°C to 70°C (-4°F to 158°F)
    • Built-in Sitronix ST7920 or compatible controller
    • Chinese Fonts in CGROM
    • Can be initialized like an HD44780 compatible 16x4 display
    • RoHS Compliant

    • This product is backordered, expected on June 5, 2016
      To reserve stock, please place an order.
    CFAG12864SYYHVT
    Quantity:

    Quantity 1 * 10 * 20 * 50 * 100 * 200 * 500 * 1000 *
    Price $19.60 $19.02 $16.52 $14.80 $13.16 $11.98 $9.99 $9.00

    • Fit (except for JTV/JPV), form and function compatible with the CFAH1602C Series of Character LCD modules. Upgrade your product that uses a CFAH1602C character display by switching to this graphic CFAH14432A, or, lower your costs by replacing this graphic with that character module
    • 144x32 graphic LCD module
    • Available in several variations of backlight and polarizer (minimum order may be required)
    • Wide temperature range: -20°C to 70°C (-4°F to 158°F)
    • Built-in Sitronix ST7920 or compatible Sitronix Controller
    • 8-bit, 4-bit parallel interface, or SPI interface
    • RoHS Compliant

    CFAG14432ATFHTT