Tutorial
Tutorial: Driving a 144×32 Graphic LCD
We have published a sample Arduino Sketch that shows how to drive a Sitronix ST7920 based CFAG14432D 144×32 Graphic LCD in our support forum. With just a few primitive functions, you can create some nice looking displays. We used a Seeeduino v4.2. An Arduino Uno would work just as well. Here is a video overview of […]
Tutorial: Driving a 144×32 Graphic LCD Read More »
LCD Glossary
Wondering how LCDs are constructed? How liquid crystals create an image? Or how backlights arranged for best viewing? What about different types of connections (SPI and I2C) and ways to drive LCD displays? So many questions. We have answers — check out the new Crystalfontz LCD Glossary. Growing Glossary of LCD Terminology and Acronyms This glossary will
Tutorial: Connecting a TFT Display Using an Arduino or SparkFun Board
In the video tutorial below, the Crystalfontz 128×128 SPI Color TFT display is connected using 4-wire SPI mode and a SparkFun RedBoard. The software demonstrates bit-banged software SPI, or can use hardware SPI. Please see our tech forum for the complete step-by-step written tutorial. One of our Twitter followers posted this update, using an Arduino-compatible board
Tutorial: Connecting a TFT Display Using an Arduino or SparkFun Board Read More »
Tutorial: Connect an Arduino to a Crystalfontz 533 Keypad LCD
In our last post, we talked about connecting a Raspberry Pi to a Crystalfontz LCD. In this post, we look at connecting an Arduino Uno with a CFA533 I2C LCD with a keypad. This gives you the ability to output and control your Arduino via I2C using a character module with a keypad interface. Let’s Get Started Step
Tutorial: Connect an Arduino to a Crystalfontz 533 Keypad LCD Read More »
Tutorial: Connect a Crystalfontz LCD with a Raspberry Pi
Have you wondered what it takes to integrate a Crystalfontz LCD with a Raspberry Pi? The answer may surprise you — it is quicker and easier than you might think.
Tutorial: Connect a Crystalfontz LCD with a Raspberry Pi Read More »
