128x36 OLED Seeeduino Development Kit
CFAL12836A0-088 Full Color .88 Inch OLED display mounted on a CFA-10082 carrier board plugged into a Seeeduino v4.2. Simply Power it on and demonstration will begin displaying images from the included SD card.
240x400 Touchscreen EVE SPI TFT
Part #: CFAF240400C0030SCA11 Size: 68mm x 38mm Interfaces: SPI Resolution: 240x400 pixels Polarizer: Transmissive Backlight: White LED
CFAF240320B1-032T-TS TFT With Carrier Board
Part #: CFAF240320B1032TTSCB Size: 57.04mm x 78.7mm x 4.2mm Interfaces: 16-bit Parallel, 8-bit Parallel Resolution: 240x320 pixels Color: RGB on Dark Polarizer: Transmissive Backlight: White LED
CFAF320240F-035T TFT With Carrier Board
Part #: CFAF320240F035TCB Size: 77.6mm x 64.4mm x 3.1mm Interfaces: 16-bit Parallel, 18-bit Parallel, 8-bit Parallel, 9-bit Parallel, DOT-CLK interface / Generic RGB, SPI Resolution: 320x240 pixels Color: RGB on Dark Polarizer: Transmissive Backlight: White LED
Serial ATX GPIO Cable
Part #: WR-PWR-Y45 This cable is 23in / 595mm long. has a WoL connector for standby voltage and a 4-pin Molex connector to allow for host Sense over GPIO.
Short USB for RPi
Part #: WR-USB-Y46 Short USB cable for connecting to a Raspberry Pi.
USB-A to 2mm LCD cable
Part #: WR-USB-Y03 USB A to 2mm connector cable used for connecting our advanced USB LCD display modules. In stock and ready to ship today.
2mm USB LCD Cable
Part #: WR-USB-Y33 Cable for use with our USB modules with 2mm header.
CFA10036 Debugging Kit
Part #: WR-DBG-Y42 CFA10036 Debugging kit. Used for debugging the highly powerful and elusive CFA10036. Comes with a WR-USB-Y03.
USB-A to Micro-B Cable
Part #: WR-USB-Y27 USB-A to Micro-B cable. 1.925 meters long. Perfect when you need a long USB cable to power our advanced LCD USB modules.
PC Power to 16-Pin Cable
Part #: WR-PWR-Y38 one meter long ATX power switch cable when you need a longer cable to reach. Perfect for rack mounted servers.
PC Power to 16 Pin Cable
Part #: WR-PWR-Y25 .27 ATX power switch cable used to connect ATX power supply to our CFA635 v1 CFA631 advanced LCD display module.
ATX Power Cable
Part #: WR-PWR-Y05 CFA633 to ATX power supply and control cable.
10 Pin to DB9 Cable
Part #: WR-232-Y13 10 pin to DB9 (male) ribbon cable with bracket to fit PC expansion slot for the CFA633
10 pin Serial Cable
Part #: WR-232-Y22 10 pin to 10 pin cable used to connect the CFA633 to a 10 pin header.
System Cooling Accessory Board
Part #: SCAB System Cooling Accessory Board adds temperature and fan functions to the USB CFA631 series and CFA635 series Advanced LCD Modules.
Part #: CFA-FBSCAB Adds temperature and fan functions to CFA735 and CFA835 displays.
16-Pin SCAB Cable
Part #: WR-EXT-Y15 16-pin SCAB connection cable for connecting your system cooling accessory board to our advanced USB LCD display.
16-Pin SCAB Ribbon Cable
Part #: WR-EXT-Y19 16-pin SCAB connection cable used to connect our system cooling accessory board (SCAB) to our advanced LCD modules.
3-pin Fan Cable
Part #: WR-FAN-X01 3-pin fan extension cable used to connect fans to the CFA631 CFA633 and CFA635 v1 series of advanced LCD display modules.
Privacy Statement to learn more.